SSH ohne Passwort funktioniert nicht

[Huschi]

Permissions 0644 for '/home/backup/.ssh/id_dsa' are too open.
It is recommended that your private key files are NOT accessible by others.
This private key will be ignored.
bad permissions: ignore key: /home/backup/.ssh/id_dsa

Diese Fehlermeldung gelesen und umgesetzt?

huschi.

 

[sono]

Du hast es jetzt zwar gelöst , aber wenn du das nächste mal wieder das Problem hast , weil vielleicht deine Conf weg ist oder so , dann lies den Abschnitt in deiner sshd conf doch mal genauer durch .

Wenn das auf jes sitzt sollte das nämlich nicht funktionieren dürfen und soweit ich das verstanden habe , hast du jetzt einfach ne fremde conf genommen oder ?

# Set this to 'yes' to enable PAM authentication (via challenge-response)
# and session processing. Depending on your PAM configuration, this may
# bypass the setting of 'PasswordAuthentication' and 'PermitEmptyPasswords'
UsePAM yes

 

[mausi]

... ein Bekannter hat sich dessen angenommen. Da ich aber in der letzten Zeit Stress hatte, weiß ich nicht mehr was er genau gemacht hatte. Ich glaube es war alles richtig bis auf irgendeine Kleinigkeit. Immer eine falsche Kombination von der conf, dem Key und den Verzeichnisrechten.

Ich poste hier einfach mal die neue Version der sshd.conf:

#	$OpenBSD: sshd_config,v 1.68 2003/12/29 16:39:50 millert Exp $

# This is the sshd server system-wide configuration file.  See
# sshd_config(5) for more information.

# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin

# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented.  Uncommented options change a
# default value.

Port **
Protocol 2
#ListenAddress 0.0.0.0
#ListenAddress ::

# HostKey for protocol version 1
#HostKey /etc/ssh/ssh_host_key
# HostKeys for protocol version 2
#HostKey /etc/ssh/ssh_host_rsa_key
#HostKey /etc/ssh/ssh_host_dsa_key

# Lifetime and size of ephemeral version 1 server key
#KeyRegenerationInterval 1h
#ServerKeyBits 768

# Logging
#obsoletes QuietMode and FascistLogging
#SyslogFacility AUTH
#LogLevel INFO

# Authentication:
AllowUsers ***
#LoginGraceTime 2m
#PermitRootLogin yes
StrictModes no 

RSAAuthentication yes
PubkeyAuthentication yes
AuthorizedKeysFile	.ssh/authorized_keys

# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
#RhostsRSAAuthentication no
# similar for protocol version 2
HostbasedAuthentication yes
# Change to yes if you don't trust ~/.ssh/known_hosts for
# RhostsRSAAuthentication and HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes

# To disable tunneled clear text passwords, change to no here!
PasswordAuthentication no
#PermitEmptyPasswords yes

# Change to no to disable s/key passwords
#ChallengeResponseAuthentication yes

# Kerberos options
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes
#KerberosGetAFSToken no

# GSSAPI options
#GSSAPIAuthentication no
#GSSAPICleanupCredentials yes

# Set this to 'yes' to enable support for the deprecated 'gssapi' authentication
# mechanism to OpenSSH 3.8p1. The newer 'gssapi-with-mic' mechanism is included
# in this release. The use of 'gssapi' is deprecated due to the presence of 
# potential man-in-the-middle attacks, which 'gssapi-with-mic' is not susceptible to.
#GSSAPIEnableMITMAttack no

# Set this to 'yes' to enable PAM authentication (via challenge-response)
# and session processing. Depending on your PAM configuration, this may
# bypass the setting of 'PasswordAuthentication' and 'PermitEmptyPasswords'
UsePAM yes 

#AllowTcpForwarding yes
#GatewayPorts no
X11Forwarding yes 
#X11DisplayOffset 10
#X11UseLocalhost yes
#PrintMotd yes
#PrintLastLog yes
#TCPKeepAlive yes
#UseLogin no
#UsePrivilegeSeparation yes
#PermitUserEnvironment no
#Compression yes
#ClientAliveInterval 0
#ClientAliveCountMax 3
#UseDNS yes
#PidFile /var/run/sshd.pid
#MaxStartups 10

# no default banner path
#Banner /some/path

# override default of no subsystems
Subsystem	sftp	/usr/lib/ssh/sftp-server