• This forum has a zero tolerance policy regarding spam. If you register here to publish advertising, your user account will be deleted without further questions.

Probleme mit Adaptec 6405

Dann fällt das wohl weg, habe die BPN-SAS-815TQ-O-P welche keinen Expander hat. Ich werde nächste Woche nochmal das Kabel tauschen und wenn das nichts hilft eine neue Backplane bestellen.
 
Adaptec hat die Logs analysiert und ist zu folgendem Ergebnis gekommen:
The results of the analysis of the logs is quite clear: the drive with the ID 0 (S/N: WD-WCAW3ETT0ASR) is failing with read- and write-errors. The RAID card is having difficulties to establish a proper communication with this right after the start of the system. Either there's a cabling issue or the drive is simply failing. I recommend to replace that drive and to check, if the RAID configuration becomes stable again. The ID 0 has got the data transfer rate of 3 Gbps. Because the drive started to fail the RAID card lowered the data transfer rate to 3 Gbps attempting to stabilize the communication. All the other drives in the present configuration do not have any indication of a failure.
Somit ist heute Abend wieder Harddisktausch angesagt.
 
Gut, statistisch gesehen gar nicht so unwahrscheinlich - (gute) HDDs gehen demnach ja meistens entweder quasi sofort oder erst sehr spät kaputt. :) Insgesamt scheint mir aber, dass du doch eine Menge Pech hattest... War ja nicht dein erster Tausch jetzt.
 
Mach unbedingt noch eine manuelle Konsistenzprüfung des RAID-Verbundes und bei gefundenen Fehlern auch entsprechende Filesystem-Checks (--force). Sonst knallt es möglicherweise irgendwann richtig.
 
Back
Top