Plesk 9.0

Strato => Plesk 9.0

Moin zusammen,

hat jemand ein Strato Server und Plesk 9 installiert oder weiss jemand ob die Lizenz dafür auch gültig ist ?

LG

do1jz
 
Moin!

10.12.08 - Information zu Plesk 9

Sehr geehrte STRATO Kundin, sehr geehrter STRATO Kunde,

der Softwarehersteller Parallels hat ein Upgrade der aktuellen Plesk-Version auf Plesk 9 zur Verfügung gestellt.

Ihr Lizenzkey für Plesk 8 oder Plesk 7 ist mit der neuen Version NICHT kompatibel.

Wir raten Ihnen daher dringend, bis auf weiteres dieses Update nicht auf Ihrem System einzuspielen.
Ohne gültigen Lizenzkey kann Plesk nicht verwendet werden.

Zur Zeit befindet sich die neue Plesk-Version in den STRATO Entwicklungslabors und wird von der Qualitätssicherung eingehend geprüft.
Sobald alle Test positiv abgeschlossen wurden stellen wir Ihnen schnellstmöglich einen Lizenzschlüssel für Plesk 9 zur Verfügung.

Ihr STRATO Server Team.
Quelle: Konfigurationspanel (http://config.strato.de)

--marneus
 
Kann ich eigentlich die Backups einzelner Domains/Kunden, die mit Plesk 8.6 angefertigt wurden einfach in Plesk 9 wieder "laden"?

Hat jemand schon ein erfolgreiches Update von Plesk 8.6 auf Plesk 9 unter Debian 4.0 gemacht?
 
Die Backups sollten untereinander kompatibel sein, natürlich nicht von 9.0 auf 8.6, aber das ist hier wohl jedem klar. Nach leidvollen Erfahrungen mit dem Plesk-Backup kann ich Dir allerdings wärmstens den Plesk Migration Manager empfehlen.

@Do1jz: Bei Plesk 8 war es eine (gefühlte) Ewigkeit. Kann das nicht mehr genau benennen, aber als der Key für Plesk 8 endlich verfügbar war, konnte ich jedes Problem, dass ich beim Update hatte, hier nachlesen :)

--marneus
 
Last edited by a moderator:
So ich habe es ja nun auch drauf und es rennt auch so wie es soll.
Nur die Frage ist diese ich habe bisher qMail genutzt und jetzt beim Update auch qMail Ausgewählt.
Was passiert eigentlich wenn ich nun Postfix auswähle nachträglich werden alle Mails und Co Migriert? Ich kanns mir schlecht erlauben das alle Mails verloren gehen ;)
Jemand schon getestet?
 
Hallo!
Nur die Frage ist diese ich habe bisher qMail genutzt und jetzt beim Update auch qMail Ausgewählt.
Über die Console und den autoinstaller funktioniert die Umstellung.
... werden alle Mails und Co Migriert?
Sind ja erst einmal zwei unabhängige Dinge (SMTP & POP/IMAP). Auf jeden Fall sind die Mails erhalten geblieben. Allerdings gibt es da schon Meldungen von Postfix, die mich ein wenig stuzig machen:
Code:
postfix.local[24502]: Warning: Handlers stack does not work

Code:
From [EMAIL="[email protected]"][email protected][/EMAIL]  Thu Dec 11 11:29:15 2008
X-Original-To: postmaster
Delivered-To: [email][email protected][/email]ldomain
Delivered-To: [email][email protected][/email]ldomain
Date: Thu, 11 Dec 2008 10:29:15 +0000 (UTC)
From: [EMAIL="[email protected]"][email protected][/EMAIL] (Mail Delivery System)
To: [EMAIL="[email protected]"][email protected][/EMAIL] (Postmaster)
Subject: Postfix SMTP server: errors from unknown[124.129.232.180]
Transcript of session follows.
 Out: 220 xxxxxx-xx-xxx-xx.dedicated.hosteurope.de ESMTP Postfix
 In:  HELO 124.129.232.180
 Out: 250 xxxxxx-xx-xxx-xx.dedicated.hosteurope.de
 In:  MAIL FROM: <[EMAIL="[email protected]"][email protected][/EMAIL]>
 Out: 250 2.1.0 Ok
 In:  RCPT TO: <[EMAIL="[email protected]"][email protected][/EMAIL]>
 Out: 250 2.1.5 Ok
 In:  DATA
 Out: 354 End data with <CR><LF>.<CR><LF>
 Out: 451 4.3.0 Error: queue file write error
 In:  QUIT
 Out: 221 2.0.0 Bye

mfG
Thorsten
 
Ich konnte Plesk von der letzten 8er Version auf die 9 updaten. Hat super geklappt. Erst hat er gemeckert wegen Lizenzschlüssel. Nach 2h gings dann von allein.

Plesk rennt und macht Spaß. jedoch bin ich mit der Performance der Webseiten nicht mehr zufrieden. Die sind seitdem lahm. CPU und loadaverage jeweils bei 0.05. Ansonsten gibts keinen traffic. Hat jemand einen Rat?

Zum webmailder. Horde ist extrem schön. Endlich modern und konkurrenzfähig. At mail (kann man nun bequem jeder kunde selbst festlegen) sieht auch nicht schlecht aus. Jedoch muss noch das deutsche Sprachpaket per Hand installiert werden.
 
zur lizenz,

mein windows vps bei netclusive hat das update auch brav gemacht.

einmal retrieve key und dann plesk einmal restarten.

Auf meiner benutzten kiste bei united hoster warte ich aber noch ein bisschen ab.

Greets LaFo
 
Auf einer Server4you Maschine mit Suse 10.3 schlägt das Update fehl.

Laut dem Support unterstützt S4you Plesk 9.0 nicht.

Folgender Log kommt mit der Installmail.

Da werd ich nicht schlau draus.

Code:
Parallels Products Installer 3.4.0 (build at 2008-11-15 22:23 svn rev. 0) started at (timezone CET) Wed Dec 10 19:28:38 2008
Command line args: /usr/local/psa/admin/bin/autoinstaller --enable-xml-output --source-type=plesk --target=/root/psa --select-release-id=PLESK_9_0_0 [email protected] --install-component=base --install-component=docs --install-component=api --install-component=pmm --install-component=sbm --install-component=java --install-component=psa-firewall --install-component=psa-vpn --install-component=psa-fileserver --install-component=watchdog --install-component=cs-gs --install-component=battlefield --install-component=bf2 --install-component=kav --install-component=spamassassin --install-component=backup-ded --install-component=atis 

Try to find rcfile...
Autoinstaller rcfile not found.
Checking hostname is sucessfull.
Opsys detected as: os_vendor=SuSE os_name=Linux version=10.3 arch=i686 environment=~empty
Final opsys (with overriding) is: os_vendor=SuSE os_name=Linux version=10.3 arch=i686 environment=~empty
Downloading the file products.inf3: 100% done.
Downloading the file plesk.inf3: 10%..21%..32%..40%..51%..61%..70%..80%..91%..100% done.
Downloading the file sitebuilder.inf3: 20%..40%..60%..80%..100% done.
Downloading the file sso.inf3: 13%..27%..40%..54%..67%..81%..94%..100% done.
repository: Get brief packages info for all sources
Checking for installed packages... 
Downloading the file PSA_9.0.0/plesk-9.0.0-suse10.3-i386.inf3: 10%..20%..30%..40%..50%..60%..70%..80%..90%..100% done.
repository: Get brief packages info for all sources
Detecting installed product components.
Component plesk/base: mode upgrade, installed=1226923643, available=1228701871
Checking if key update required for component plesk/base
Config allows upgrade from version 9.0 without key update
Currently installed component version is 8.6.0-suse10.3.build86080722.00
Keyupgrade need for plesk/base
Component plesk/psa-autoinstaller: mode up2date, installed=1226766452, available=1226766452
Component plesk/php5: mode up2date, installed=0, available=0
Component plesk/postgresql: mode up2date, installed=0, available=0
Component plesk/vault: mode upgrade, installed=1216663247, available=1226923633
Component plesk/docs: mode upgrade, installed=1216663203, available=1226923591
Component plesk/ppwse: mode upgrade, installed=1209183388, available=1226923608
Component plesk/api: mode upgrade, installed=1222719675, available=1228701862
Component plesk/pmm: mode upgrade, installed=1224036581, available=1228701868
Component plesk/sb-publish: mode up2date, installed=1200292672, available=1200292672
Component plesk/sbm: mode upgrade, installed=1210144475, available=1220864885
Component plesk/cf-support: mode upgrade, installed=1209183404, available=1226923622
Component plesk/miva: mode upgrade, installed=1209183409, available=1226923626
Component plesk/billing: mode install, installed=0, available=1228546791
Component plesk/mod-bw: mode up2date, installed=1200292828, available=1200292828
Component plesk/asp: mode up2date, installed=1200370842, available=1200370842
Component plesk/java: mode upgrade, installed=1216663142, available=1226923557
Component plesk/mod_python: mode up2date, installed=0, available=0
Component plesk/ruby: mode upgrade, installed=1209183406, available=1226923623
Component plesk/qmail: mode install, installed=0, available=1226923641
Component plesk/postfix: mode install, installed=0, available=1226923641
Component plesk/psa-firewall: mode upgrade, installed=1216663141, available=1226923556
Component plesk/psa-vpn: mode upgrade, installed=1216663199, available=1226923588
Component plesk/psa-fileserver: mode upgrade, installed=1216663132, available=1226923547
Component plesk/sshterm: mode upgrade, installed=1209183265, available=1226374934
Component plesk/watchdog: mode upgrade, installed=1221224370, available=1226923613
Component plesk/cs-gs: mode upgrade, installed=1216663138, available=1226923554
Component plesk/battlefield: mode upgrade, installed=1216663210, available=1226923600
Component plesk/bf2: mode upgrade, installed=1209183403, available=1226923621
Component plesk/mailman: mode upgrade, installed=1209183400, available=1226923618
Component plesk/kav: mode upgrade, installed=1209183413, available=1226923630
Component plesk/drweb: mode upgrade, installed=1160819475, available=1226923529
Component plesk/spamassassin: mode upgrade, installed=1216663145, available=1226923561
Component plesk/backup-ded: mode upgrade, installed=1222719677, available=1228701865
Component plesk/atis: mode upgrade, installed=1206350365, available=1225196787
Component plesk/de-DE-locale: mode upgrade, installed=1209566024, available=1226570471
Component plesk/es-ES-locale: mode install, installed=0, available=1226570493
Component plesk/fr-FR-locale: mode install, installed=0, available=1226570509
Component plesk/horde: mode upgrade, installed=1216663207, available=1226923597
Component plesk/atmail: mode install, installed=0, available=1226923523
Exchanging information with licensing server.base
Downloading the file PSA_9.0.0/plesk_getkeyinfo.sh: 100% done.
Ask KA server for key update: product=PleskLogin current key number=PLSK005686870004 to version=9.0.0
KA server said: you can upgrade your key automaticaly (result code is 0)
repository: Get full packages info for all sources
Retrieving information about the installed packages... 
read cache file
Downloading the file PSA_9.0.0/dist-rpm-SuSE-10.3-i386/build-9.0.0-suse10.3-i386.hdr.gz: 10%..20%..30%..40%..50%..60%..70%..80%..90%..100% done.
Downloading the file PSA_9.0.0/update-rpm-SuSE-10.3-i386/update-9.0.0-suse10.3-i386.hdr.gz: 10%..20%..30%..40%..50%..60%..70%..80%..90%..100% done.
Downloading the file PSA_9.0.0/thirdparty-rpm-SuSE-10.3-i386/thirdparty-9.0.0-suse10.3-i386.hdr.gz: 12%..21%..31%..40%..50%..62%..78%..81%..100% done.
Determining the packages that need to be installed.
skip package \ plesk-base-9.0.0-suse10.3.build90081117.17.i586 (s 0x870f968 source=0x869cc88 P:16 R:13)\ from component base - there is same or newer version of this package is installed (in system plesk-base-9.0.0-suse10.3.build90081117.17.i586 (s 0x870f968 source=0x869cc88 P:16 R:13))
skip package \ psa-logrotate-3.7-suse10.3.build90081117.17.i586 (s 0x8d720e0 source=0x869cc88 P:8 R:8)\ from component base - there is same or newer version of this package is installed (in system psa-logrotate-3.7-suse10.3.build90081117.17.i586 (s 0x8d720e0 source=0x869cc88 P:8 R:8))
skip package \ psa-mod-fcgid-configurator-1.0.1-0.94849.i586 (s 0x8702638 source=0x869cc88 P:6 R:6)\ from component base - there is same or newer version of this package is installed (in system psa-mod-fcgid-configurator-1.0.1-0.94849.i586 (s 0x8702638 source=0x869cc88 P:6 R:6))
skip package \ psa-proftpd-1.3.1-suse10.3.build90081117.17.i586 (s 0x8f17038 source=0x869cc88 P:139 R:18)\ from component base - there is same or newer version of this package is installed (in system psa-proftpd-1.3.1-suse10.3.build90081117.17.i586 (s 0x8f17038 source=0x869cc88 P:139 R:18))
skip package \ psa-proftpd-xinetd-1.3.1-suse10.3.build90081117.17.i586 (s 0x8704f80 source=0x869cc88 P:6 R:6)\ from component base - there is same or newer version of this package is installed (in system psa-proftpd-xinetd-1.3.1-suse10.3.build90081117.17.i586 (s 0x8704f80 source=0x869cc88 P:6 R:6))
skip package \ psa-pylibplesk-9.0.0-suse10.3.build90081117.17.i586 (s 0x8d723b0 source=0x869cc88 P:10 R:0)\ from component base - there is same or newer version of this package is installed (in system psa-pylibplesk-9.0.0-suse10.3.build90081117.17.i586 (s 0x8d723b0 source=0x869cc88 P:10 R:0))
skip package \ log4cpp-plesk-0.3.5rc2-v9.275143.i586 (s 0x87050e8 source=0x869cc88 P:4 R:12)\ from component pmm - there is same or newer version of this package is installed (in system log4cpp-plesk-0.3.5rc2-v9.275143.i586 (s 0x87050e8 source=0x869cc88 P:4 R:12))
skip package \ psa-ftputil-1:2.1.1-0.98221.noarch (s 0x86d77c8 source=0x869cc88 P:49 R:0)\ from component backup-ded - there is same or newer version of this package is installed (in system psa-ftputil-1:2.1.1-0.98221.noarch (s 0x86d77c8 source=0x869cc88 P:49 R:0))
Warning: unresolved requires \ tomcat55-common-lib = 5.5.23-113.5\ from tomcat55-5.5.23-113.5.noarch (s 0x8701c00 source=0x869cc88 P:96 R:26)
Warning: unresolved requires \ tomcat55-server-lib = 5.5.23-113.5\ from tomcat55-5.5.23-113.5.noarch (s 0x8701c00 source=0x869cc88 P:96 R:26)
Warning: unresolved requires \ tomcat55-common-lib = 5.5.23-113.5\ from tomcat55-5.5.23-113.5.noarch (s 0x8701c00 source=0x869cc88 P:96 R:26)
Warning: unresolved requires \ tomcat55-server-lib = 5.5.23-113.5\ from tomcat55-5.5.23-113.5.noarch (s 0x8701c00 source=0x869cc88 P:96 R:26)
Unhappy catched; try to resolve again.
The requested package \ psa-mail-pc-driver\ could not be installed.
Searching problems for the \ psa-mail-pc-driver\ package.
No suitable solutions were found for the \ postfix\ dependency.
The \ postfix-2.4.5-20.6.i586 (u 0x9503df8 source=0x87ce0f0 P:410 R:44)\ package resolves \ postfix\ .
Searching problems for the \ postfix\ package.
Packages \ postfix-2.4.5-20.6.i586 (u 0x9503df8 source=0x87ce0f0 P:410 R:44)\ and \ psa-qmail-1:1.03-suse10.3.build90081117.17.i586 (b 0x92d4100 source=0x87cdfe0 P:361 R:21)\ cannot be installed at the same time
because \ postfix-2.4.5-20.6.i586 (u 0x9503df8 source=0x87ce0f0 P:410 R:44)\ conflicts with \ sendmail\ .
Package \ postfix-2.4.5-20.6.i586 (u 0x9503df8 source=0x87ce0f0 P:410 R:44)\ was choosen because of the following dependencies:
\ postfix\ from \ psa-mail-pc-driver-1.0.0-suse10.3.build90081117.17.i586 (t 0x9286fb8 source=0x87cdfe0 P:27 R:40)\ 
Solution for dependency \ postfix\ is not available.Problem occured during searching directly resolved dependencies for \ postfix\ of package psa-mail-pc-driver-1.0.0-suse10.3.build90081117.17.i586 (t 0x9286fb8 source=0x87cdfe0 P:27 R:40)Unhappy catched; try to resolve again.
The requested package \ psa-mail-pc-driver\ could not be installed.
Searching problems for the \ psa-mail-pc-driver\ package.
No suitable solutions were found for the \ postfix\ dependency.
The \ postfix-2.4.5-20.6.i586 (u 0x9503df8 source=0x87ce0f0 P:410 R:44)\ package resolves \ postfix\ .
Searching problems for the \ postfix\ package.
Packages \ postfix-2.4.5-20.6.i586 (u 0x9503df8 source=0x87ce0f0 P:410 R:44)\ and \ psa-qmail-1:1.03-suse10.3.build90081117.17.i586 (s 0x86d7648 source=0x869cc88 P:361 R:21)\ cannot be installed at the same time
because \ postfix-2.4.5-20.6.i586 (u 0x9503df8 source=0x87ce0f0 P:410 R:44)\ conflicts with \ sendmail\ .
Package \ postfix-2.4.5-20.6.i586 (u 0x9503df8 source=0x87ce0f0 P:410 R:44)\ was choosen because of the following dependencies:
\ postfix\ from \ psa-mail-pc-driver-1.0.0-suse10.3.build90081117.17.i586 (t 0x9286fb8 source=0x87cdfe0 P:27 R:40)\ 
Solution for dependency \ postfix\ is not available.Problem occured during searching directly resolved dependencies for \ postfix\ of package psa-mail-pc-driver-1.0.0-suse10.3.build90081117.17.i586 (t 0x9286fb8 source=0x87cdfe0 P:27 R:40)Unhappy catched; try to resolve again.
Unhappy catched; try to resolve again.
The requested package \ psa-mail-pc-driver\ could not be installed.
Searching problems for the \ psa-mail-pc-driver\ package.
No suitable solutions were found for the \ postfix\ dependency.
The \ postfix-2.4.5-20.6.i586 (u 0x9503df8 source=0x87ce0f0 P:410 R:44)\ package resolves \ postfix\ .
Searching problems for the \ postfix\ package.
Packages \ postfix-2.4.5-20.6.i586 (u 0x9503df8 source=0x87ce0f0 P:410 R:44)\ and \ psa-qmail-1:1.03-suse10.3.build90081117.17.i586 (b 0x92d4100 source=0x87cdfe0 P:361 R:21)\ cannot be installed at the same time
because \ postfix-2.4.5-20.6.i586 (u 0x9503df8 source=0x87ce0f0 P:410 R:44)\ conflicts with \ sendmail\ .
Package \ postfix-2.4.5-20.6.i586 (u 0x9503df8 source=0x87ce0f0 P:410 R:44)\ was choosen because of the following dependencies:
\ postfix\ from \ psa-mail-pc-driver-1.0.0-suse10.3.build90081117.17.i586 (t 0x9286fb8 source=0x87cdfe0 P:27 R:40)\ 
Solution for dependency \ postfix\ is not available.Problem occured during searching directly resolved dependencies for \ postfix\ of package psa-mail-pc-driver-1.0.0-suse10.3.build90081117.17.i586 (t 0x9286fb8 source=0x87cdfe0 P:27 R:40)Unhappy catched; try to resolve again.
The requested package \ psa-mail-pc-driver\ could not be installed.
Searching problems for the \ psa-mail-pc-driver\ package.
No suitable solutions were found for the \ postfix\ dependency.
The \ postfix-2.4.5-20.6.i586 (u 0x9503df8 source=0x87ce0f0 P:410 R:44)\ package resolves \ postfix\ .
Searching problems for the \ postfix\ package.
Packages \ postfix-2.4.5-20.6.i586 (u 0x9503df8 source=0x87ce0f0 P:410 R:44)\ and \ psa-qmail-1:1.03-suse10.3.build90081117.17.i586 (s 0x86d7648 source=0x869cc88 P:361 R:21)\ cannot be installed at the same time
because \ postfix-2.4.5-20.6.i586 (u 0x9503df8 source=0x87ce0f0 P:410 R:44)\ conflicts with \ sendmail\ .
Package \ postfix-2.4.5-20.6.i586 (u 0x9503df8 source=0x87ce0f0 P:410 R:44)\ was choosen because of the following dependencies:
\ postfix\ from \ psa-mail-pc-driver-1.0.0-suse10.3.build90081117.17.i586 (t 0x9286fb8 source=0x87cdfe0 P:27 R:40)\ 
Solution for dependency \ postfix\ is not available.Problem occured during searching directly resolved dependencies for \ postfix\ of package psa-mail-pc-driver-1.0.0-suse10.3.build90081117.17.i586 (t 0x9286fb8 source=0x87cdfe0 P:27 R:40)Unhappy catched; try to resolve again.
Check package set before installation
Downloading the file PSA_9.0.0/dist-rpm-SuSE-10.3-i386/base/plesk-skins-9.0.0-0.278956.noarch.rpm: skipped because of md5 checksum match.
Downloading the file PSA_9.0.0/dist-rpm-SuSE-10.3-i386/base/psa-9.0.0-suse10.3.build90081117.17.i586.rpm: skipped because of md5 checksum match.
Downloading the file PSA_9.0.0/dist-rpm-SuSE-10.3-i386/base/psa-api-9.0.0-suse10.3.build90081208.07.noarch.rpm: skipped because of md5 checksum match.
Downloading the file PSA_9.0.0/dist-rpm-SuSE-10.3-i386/base/psa-awstats-configurator-1.0.0-suse10.3.build90081117.17.noarch.rpm: skipped because of md5 checksum match.
Downloading the file PSA_9.0.0/dist-rpm-SuSE-10.3-i386/base/psa-hotfix3-9.0.0-9.0.0-suse10.3.build90081208.07.i586.rpm: skipped because of md5 checksum match.
Downloading the file PSA_9.0.0/dist-rpm-SuSE-10.3-i386/base/psa-libpam-plesk-9.0.0-suse10.3.build90081117.17.i586.rpm: skipped because of md5 checksum match.
Downloading the file PSA_9.0.0/dist-rpm-SuSE-10.3-i386/base/psa-locale-base-en-US-9.0.0-08111414.noarch.rpm: skipped because of md5 checksum match.
Downloading the file PSA_9.0.0/dist-rpm-SuSE-10.3-i386/base/psa-updates-9.0.0-suse10.3.build90081208.07.noarch.rpm: skipped because of md5 checksum match.
Downloading the file PSA_9.0.0/dist-rpm-SuSE-10.3-i386/opt/docs/psa-manual-custom-skin-guide-9.0.0-suse10.3.build90081117.17.noarch.rpm: skipped because of md5 checksum match.
Downloading the file PSA_9.0.0/dist-rpm-SuSE-10.3-i386/opt/api/psa-api-rpc-9.0.0-suse10.3.build90081208.07.noarch.rpm: skipped because of md5 checksum match.
Downloading the file PSA_9.0.0/dist-rpm-SuSE-10.3-i386/opt/migration/psa-migration-manager-9.0.0-suse10.3.build90081208.07.i586.rpm: skipped because of md5 checksum match.
Downloading the file PSA_9.0.0/dist-rpm-SuSE-10.3-i386/opt/sitebuilder/psa-sbm3-5.0-35.noarch.rpm: skipped because of md5 checksum match.
Downloading the file PSA_9.0.0/dist-rpm-SuSE-10.3-i386/opt/java/psa-tomcat-configurator-9.0.0-suse10.3.build90081117.17.noarch.rpm: skipped because of md5 checksum match.
Downloading the file PSA_9.0.0/dist-rpm-SuSE-10.3-i386/opt/modules/firewall/psa-firewall-1.0.1-suse10.3.build90081117.17.i586.rpm: skipped because of md5 checksum match.
Downloading the file PSA_9.0.0/dist-rpm-SuSE-10.3-i386/opt/modules/vpn/psa-vpn-2.0.1-suse10.3.build90081117.17.i586.rpm: skipped because of md5 checksum match.
Downloading the file PSA_9.0.0/dist-rpm-SuSE-10.3-i386/opt/modules/fileserver/psa-fileserver-1.0.0-suse10.3.build90081117.17.i586.rpm: skipped because of md5 checksum match.
Downloading the file PSA_9.0.0/dist-rpm-SuSE-10.3-i386/opt/modules/watchdog/psa-watchdog-2.0.3-suse10.3.build90081117.17.i586.rpm: skipped because of md5 checksum match.
Downloading the file PSA_9.0.0/dist-rpm-SuSE-10.3-i386/opt/modules/csgs/cs-gs-2.0.0-suse10.3.build90081117.17.i586.rpm: skipped because of md5 checksum match.
Downloading the file PSA_9.0.0/dist-rpm-SuSE-10.3-i386/opt/modules/bf1942/psa-bf1942-1.0.0-suse10.3.build90081117.17.i586.rpm: skipped because of md5 checksum match.
Downloading the file PSA_9.0.0/dist-rpm-SuSE-10.3-i386/opt/modules/bf2/psa-bf2-1.0.0-suse10.3.build90081117.17.i586.rpm: skipped because of md5 checksum match.
Downloading the file PSA_9.0.0/dist-rpm-SuSE-10.3-i386/opt/modules/kav/psa-kav-1.0.0-suse10.3.build90081117.17.i386.rpm: skipped because of md5 checksum match.
Downloading the file PSA_9.0.0/dist-rpm-SuSE-10.3-i386/opt/mail/psa-spamassassin-9.0.0-suse10.3.build90081117.17.i586.rpm: skipped because of md5 checksum match.
Downloading the file PSA_9.0.0/dist-rpm-SuSE-10.3-i386/opt/backup/psa-backup-manager-9.0.0-suse10.3.build90081208.07.i586.rpm: skipped because of md5 checksum match.
Downloading the file PSA_9.0.0/dist-rpm-SuSE-10.3-i386/opt/modules/atis/psa-atis-1.0-49.i386.rpm: skipped because of md5 checksum match.
Downloading the file PSA_9.0.0/dist-rpm-SuSE-10.3-i386/opt/vault/psa-appvault-updates-9.0.0-suse10.3.build90081117.17.noarch.rpm: skipped because of md5 checksum match.
Downloading the file PSA_9.0.0/dist-rpm-SuSE-10.3-i386/opt/maildrivers/psa-mail-qc-driver-1.0.0-suse10.3.build90081117.17.i586.rpm: skipped because of md5 checksum match.
Downloading the file PSA_9.0.0/dist-rpm-SuSE-10.3-i386/opt/maildrivers/psa-mail-driver-common-9.0.0-suse10.3.build90081117.17.i586.rpm: skipped because of md5 checksum match.
Starting installation of packages
Warning: unresolved requires \ tomcat55-common-lib = 5.5.23-113.5\ from tomcat55-5.5.23-113.5.noarch (s 0x8701c00 source=0x869cc88 P:96 R:26)
Warning: unresolved requires \ tomcat55-server-lib = 5.5.23-113.5\ from tomcat55-5.5.23-113.5.noarch (s 0x8701c00 source=0x869cc88 P:96 R:26)
Warning: unresolved requires \ tomcat55-common-lib = 5.5.23-113.5\ from tomcat55-5.5.23-113.5.noarch (s 0x8701c00 source=0x869cc88 P:96 R:26)
Warning: unresolved requires \ tomcat55-server-lib = 5.5.23-113.5\ from tomcat55-5.5.23-113.5.noarch (s 0x8701c00 source=0x869cc88 P:96 R:26)
Installing the package psa-mail-driver-common-9.0.0-suse10.3.build90081117.17.i586 (t 0x92cb200 source=0x87cdfe0 P:26 R:36), psa-9.0.0-suse10.3.build90081117.17.i586 (b 0x8fa9868 source=0x87cdfe0 P:3636 R:79), psa-libpam-plesk-9.0.0-suse10.3.build90081117.17.i586 (b 0x927a8f8 source=0x87cdfe0 P:17 R:20), psa-mail-qc-driver-1.0.0-suse10.3.build90081117.17.i586 (t 0x9287ae0 source=0x87cdfe0 P:25 R:39), psa-locale-base-en-US-9.0.0-08111414.noarch (b 0x927b2c8 source=0x87cdfe0 P:1596 R:0), psa-api-9.0.0-suse10.3.build90081208.07.noarch (b 0x8fad570 source=0x87cdfe0 P:971 R:6), plesk-skins-9.0.0-0.278956.noarch (b 0x8fa8d48 source=0x87cdfe0 P:6637 R:0), psa-bf2-1.0.0-suse10.3.build90081117.17.i586 (b 0x9273f98 source=0x87cdfe0 P:175 R:24), psa-backup-manager-9.0.0-suse10.3.build90081208.07.i586 (b 0x9261a60 source=0x87cdfe0 P:392 R:6), psa-manual-custom-skin-guide-9.0.0-suse10.3.build90081117.17.noarch (b 0x9288800 source=0x87cdfe0 P:98 R:1), psa-firewall-1.0.1-suse10.3.build90081117.17.i586 (b 0x9276890 source=0x87cdfe0 P:134 R:20), cs-gs-2.0.0-suse10.3.build90081117.17.i586 (b 0x8f1cff8 source=0x87cdfe0 P:335 R:28), psa-vpn-2.0.1-suse10.3.build90081117.17.i586 (b 0x92d69a8 source=0x87cdfe0 P:215 R:11), psa-watchdog-2.0.3-suse10.3.build90081117.17.i586 (b 0x92d7620 source=0x87cdfe0 P:263 R:32), psa-kav-1.0.0-suse10.3.build90081117.17.i386 (b 0x9278908 source=0x87cdfe0 P:208 R:42), psa-migration-manager-9.0.0-suse10.3.build90081208.07.i586 (b 0x9288900 source=0x87cdfe0 P:278 R:51), psa-updates-9.0.0-suse10.3.build90081208.07.noarch (b 0x92d6600 source=0x87cdfe0 P:1 R:3), psa-bf1942-1.0.0-suse10.3.build90081117.17.i586 (b 0x92738a8 source=0x87cdfe0 P:160 R:25), psa-appvault-updates-9.0.0-suse10.3.build90081117.17.noarch (t 0x91a1810 source=0x87cdfe0 P:1 R:1), psa-api-rpc-9.0.0-suse10.3.build90081208.07.noarch (b 0x8fadfa0 source=0x87cdfe0 P:83 R:6), psa-fileserver-1.0.0-suse10.3.build90081117.17.i586 (b 0x9275eb8 source=0x87cdfe0 P:249 R:23), psa-hotfix3-9.0.0-9.0.0-suse10.3.build90081208.07.i586 (b 0x9277dd0 source=0x87cdfe0 P:56 R:3)
error: Failed dependencies:
psa-hotfix4-8.6.0 = 8.6.0 is needed by (installed) psa-hotfix5-8.6.0-8.6.0-suse10.3.build86080930.03.i586
ERROR: Unable to install the requested packages because either there is
not enough free disk space left, or there are package dependency problems.
Warning! Not all packages were installed.
Please check if your system services are operable.
Please, contact product technical support.


---
Parallels Products Installer.=
 
Hallo!
psa-hotfix4-8.6.0 = 8.6.0 is needed by (installed) psa-hotfix5-8.6.0-8.6.0-suse10.3.build86080930.03.i586
ERROR: Unable to install the requested packages because either there is
not enough free disk space left, or there are package dependency problems.
Von genau diesem Problem sprach ich bereits.

mfG
Thorsten
 
Hallo!
Starte YaST, Software hinzufügen entfernen, [Alt]- für suchen, psa eintragen und den Hotfix auswählen. Danach wird YaST über 2 ungelöste Abhängigkeiten meckern. Auch diese zur Deinstallation auswählen.

mfG
Thorsten
 
Hat sich schon einmal wer mit dem Interface und dem anpassen des solchen befasst? Also ich möchte eben das Interface für Kunden bzw. Domain-Admins sehr restriktiv einstellen, was einfach nicht geht. Man kann diverse Berechtigungen wegnehmen, aber gewisse Teile bleiben trotzdem bestellen. Wenn man das über "Skins" und die "Startseiten Voreinstellungen" geht und dort z.b. eine Kopie von "Default Client Home Page" macht und diese verändert, geht es zwar einigermassen, aber man sperrt sich quasi selbst aus, selbst als Admin. Gehe ich als Admin eingeloggt auf einen Kunden dem ich dieses Template verpasst habe, sehe ich auch nur noch genau die Sachen die ich im erlaube, das ergibt irgendwie keinen Sinn ?!
 
Back
Top