SSL unter Confixx

I

Internetage.Was

New Member
Guten Tag,

und zwar habe ich ein Problem,
Wenn ich mich unter meinem Resselaccount unter Confixx anmelde, sehe ich nirgends den Punkt SSL, wo kann ich dieses aktivieren?
Im Adminmenu habe ich nichts gefunden,
openssl ist soweit installiert und aktuell!

MfG
Internetage.Was
 
Auf der Konsole über das admin.pl Skript aktivieren, sofern noch nicht geschehen. Anschließend muss der Admin das Feature für den Reseller und der Reseller wiederum für den User aktivieren.
 
Okay habe ich hinzugefügt,
nun aber wenn ich es auswähle und auf fortfahren klicke,
möchte er wissen wo openssl liegt /usr/local/bin liegt es nicht sagt er,
ich soll ihm nun sagen wo es liegt, aber wo liegt es?
Kann ich es in usr/local/bin nochmal installieren?

MfG
 
Der Befehl openssl kann nicht im Standard-Pfad gefunden werden. Wenn Du das Paket selbst kompiliert und installiert hast, musst Du den entsprechenden Pfad zum Binary entweder davor stellen (also /usr/meinesoft/openssl-0.9.8g/bin/openssl) oder eben zum Suchpfad zufügen.
Das einfachste ist jedoch, das Paket über die Paketverwaltung Deiner Distribution zu installieren, dann wird es automatisch in einem Verzeichnis installiert, dass sich im Suchpfad befindet.
 
so bin wieder ein stück weiter,
nun ist openssl unter /usr/lib/ssl installiert,
wenn ich jetzt aber openssl genrsa -aes256 -out private/vpn-cakey.pem 2048 ausführe,
kommt die Fehlermeldung

-bash: openssl: command not found

was kann das den sein?

MfG
 
Hallo!
Normalerweise sollte dies mit aptitude install openssl erledigt sein.

mfG
Thorsten
 
das habe ich auch gedacht,
nur wenn ich halt den befehl ausführe das er mir eine neue crt macht kommt halt dieser Fehler!

MfG

Ich frage mich halt nur, wieso er es gleich verwirft!
und den Fehler mit bash rausschmeisst!
 
Last edited by a moderator:
Du hast kein openssl installiert. Goto #12.
Das mit der Groß- und Kleinschreibung klappt noch nicht wirklich gut.

mfG
Thorsten
 
Mach mal
Code: 
aptitude remove openssl
oder
Code: 
apt-get remove --purge openssl

anschließend

Code: 
aptitude clean && aptitude autoclean
oder
Code: 
apt-get clean && apt-get autoclean

weiterhin

Code: 
aptitude install openssl
oder
Code: 
apt-get install openssl

und als letztes noch
Code: 
which openssl

Die gesamte Ausgabe hier posten.

PS: Entweder nur die aptitude oder nur die apt-get Befehle nutzen!
 
Code: 
Need to get 0B of archives.
After unpacking 20.1MB disk space will be freed.
Do you want to continue [Y/n]? n
Abort.
vadmin27:~# aptitude clean && aptitude autoclean
Reading package lists... Done
Building dependency tree... Done
Initializing package states... Done
Reading task descriptions... Done
Building tag database... Done
Reading package lists... Done
Building dependency tree... Done
Initializing package states... Done
Reading task descriptions... Done
Building tag database... Done
Freed 0B of disk space
vadmin27:~# aptitude install openssl
Reading package lists... Done
Building dependency tree... Done
Initializing package states... Done
Reading task descriptions... Done
Building tag database... Done
No packages will be installed, upgraded, or removed.
0 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 0B of archives. After unpacking 0B will be used.
Writing extended state information... Done
vadmin27:~# which openssl
vadmin27:~#
vadmin27:~# Linux vadmin27 2.6.20-xen-r6 #2 SMP Sat Mar 8 22:33:15 CET 2008 x86_64
-bash: Linux: command not found
vadmin27:~# Debian 4.0 Etch + Confixx
-bash: Debian: command not found
vadmin27:~# vadmin27:~# aptitude remove openssl
-bash: vadmin27:~#: command not found
vadmin27:~# Reading package lists... Done
-bash: Reading: command not found
vadmin27:~# Building dependency tree... Done
-bash: Building: command not found
vadmin27:~# Initializing package states... Done
-bash: Initializing: command not found
vadmin27:~# Reading task descriptions... Done
-bash: Reading: command not found
vadmin27:~# Building tag database... Done
-bash: Building: command not found
vadmin27:~# The following packages are BROKEN:
  ca-certificates ssl-cert
-bash: The: command not found
vadmin27:~#   ca-certificates ssl-cert
-bash: ca-certificates: command not found
vadmin27:~# The following packages will be REMOVED:
-bash: The: command not found
vadmin27:~#   openssl
0 packages upgraded, 0 newly installed, 1 to remove and 0 not upgraded.
-bash: openssl: command not found
vadmin27:~# 0 packages upgraded, 0 newly installed, 1 to remove and 0 not upgraded.
Need to get 0B of archives. After unpacking 2273kB will be freed.
-bash: 0: command not found
vadmin27:~# Need to get 0B of archives. After unpacking 2273kB will be freed.
-bash: Need: command not found
vadmin27:~# The following packages have unmet dependencies:
-bash: The: command not found
  ca-certificates: Depends: openssl but it is not installable
vadmin27:~#   ca-certificates: Depends: openssl but it is not installable
Resolving dependencies...
-bash: ca-certificates:: command not found
vadmin27:~#   ssl-cert: Depends: openssl but it is not installable
-bash: ssl-cert:: command not found
vadmin27:~# Resolving dependencies...
-bash: Resolving: command not found
vadmin27:~# The following actions will resolve these dependencies:
-bash: The: command not found
vadmin27:~#
vadmin27:~# Remove the following packages:
ca-certificates
-bash: Remove: command not found
vadmin27:~# ca-certificates
-bash: ca-certificates: command not found
vadmin27:~# clamav
-bash: clamav: command not found
vadmin27:~# clamav-daemon
-bash: clamav-daemon: command not found
clamav-freshclam
vadmin27:~# clamav-freshclam
libclamav2
-bash: clamav-freshclam: command not found
vadmin27:~# libclamav2
libcurl3
-bash: libclamav2: command not found
vadmin27:~# libcurl3
-bash: libcurl3: command not found
vadmin27:~# postfix
ssl-cert

Install the following packages:
ssmtp [2.61-11.1 (stable)]

Leave the following dependencies unresolved:
clamav-base recommends clamav
Score is -3027

Accept this solution? [Y/n/q/?] q
Abandoning all efforts to resolve these dependencies.
postfix/postfix-script: fatal: usage: postfix start (or stop, reload, abort, flush, check, set-permissions, upgrade-configuration)
Abort.
vadmin27:~# ssl-cert
vadmin27:~# apt-get remove --purge openssl
-bash: ssl-cert: command not found
vadmin27:~#
vadmin27:~# Install the following packages:
-bash: Install: command not found
Building dependency tree... Done
vadmin27:~# ssmtp [2.61-11.1 (stable)]
-bash: syntax error near unexpected token `('
vadmin27:~#
vadmin27:~# Leave the following dependencies unresolved:
-bash: Leave: command not found
  amavisd-new* ca-certificates* clamav* clamav-daemon* clamav-freshclam* libclamav2* libcurl3* openssl*
vadmin27:~# clamav-base recommends clamav
-bash: clamav-base: command not found
vadmin27:~# Score is -3027
-bash: Score: command not found
vadmin27:~#
vadmin27:~# Accept this solution? [Y/n/q/?] q
-bash: Accept: command not found
0 upgraded, 0 newly installed, 12 to remove and 0 not upgraded.
vadmin27:~# Abandoning all efforts to resolve these dependencies.
-bash: Abandoning: command not found
vadmin27:~# Abort.
-bash: Abort.: command not found
vadmin27:~# vadmin27:~# apt-get remove --purge openssl
Abort.
-bash: vadmin27:~#: command not found
vadmin27:~# Reading package lists... Done
vadmin27:~# aptitude clean && aptitude autoclean
-bash: Reading: command not found
vadmin27:~# Building dependency tree... Done
-bash: Building: command not found
vadmin27:~# The following packages will be REMOVED:
-bash: The: command not found
Initializing package states... Done
vadmin27:~#   amavisd-new* ca-certificates* clamav* clamav-daemon* clamav-freshclam* libclamav2* libcurl3* openssl*
-bash: amavisd-new*: command not found
vadmin27:~#   pop-before-smtp* postfix* qpopper* ssl-cert*
-bash: pop-before-smtp*: command not found
vadmin27:~# 0 upgraded, 0 newly installed, 12 to remove and 0 not upgraded.
-bash: 0: command not found
vadmin27:~# Need to get 0B of archives.
-bash: Need: command not found
Reading package lists... Done
vadmin27:~# After unpacking 20.1MB disk space will be freed.
-bash: After: command not found
vadmin27:~# Do you want to continue [Y/n]? n
-bash: Do: command not found
vadmin27:~# Abort.
-bash: Abort.: command not found
vadmin27:~# vadmin27:~# aptitude clean && aptitude autoclean
-bash: vadmin27:~#: command not found
vadmin27:~# Reading package lists... Done
Building tag database... Done
-bash: Reading: command not found
vadmin27:~# Building dependency tree... Done
-bash: Building: command not found
Freed 0B of disk space
vadmin27:~# Initializing package states... Done
-bash: Initializing: command not found
vadmin27:~# Reading task descriptions... Done
-bash: Reading: command not found
vadmin27:~# Building tag database... Done
vadmin27:~# aptitude install openssl
-bash: Building: command not found
vadmin27:~# Reading package lists... Done
-bash: Reading: command not found
Reading package lists... Done
vadmin27:~# Building dependency tree... Done
Initializing package states... Done
-bash: Building: command not found
vadmin27:~# Initializing package states... Done
Reading task descriptions... Done
-bash: Initializing: command not found
vadmin27:~# Reading task descriptions... Done
-bash: Reading: command not found
vadmin27:~# Building tag database... Done
-bash: Building: command not found
vadmin27:~# Freed 0B of disk space
-bash: Freed: command not found
vadmin27:~# vadmin27:~# aptitude install openssl
Writing extended state information... Done
-bash: vadmin27:~#: command not found
vadmin27:~# Reading package lists... Done
-bash: Reading: command not found
vadmin27:~# Building dependency tree... Done
-bash: Building: command not found
vadmin27:~# Initializing package states... Done
-bash: Initializing: command not found
vadmin27:~# Reading task descriptions... Done
vadmin27:~# which openssl
-bash: Reading: command not found
vadmin27:~# Building tag database... Done
-bash: Building: command not found
vadmin27:~# No packages will be installed, upgraded, or removed.
-bash: No: command not found
vadmin27:~# 0 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
-bash: 0: command not found
vadmin27:~# Need to get 0B of archives. After unpacking 0B will be used.
-bash: Need: command not found
vadmin27:~# Writing extended state information... Done
-bash: Writing: command not found
vadmin27:~# vadmin27:~# which openssl
-bash: vadmin27:~#: command not found
vadmin27:~# vadmin27:~#
-bash: vadmin27:~#: command not found
vadmin27:~#
 
Last edited by a moderator:
Du hast kein Problem mit openssl, du hast ein Problem mit deinem Server.
Die ganzen "-bash:..." Zeilen gehören da normalerweise nicht hin.

Über die Fehlerbeseitigung würde ich mir keine Gedanken machen, einfach Daten sichern und Server neu aufsetzen, denn die großen Suchmaschienen liefern zu diesem Problem nicht einen einzigen Eintrag. Lediglich zur Fehlermeldung "command not found" was auf eine fehlende Software hinweist. Jedoch im Zusammenhang mit "-bash" oder nur "-bash" liefern die Suchmaschienen wie bereits erwähnt kein Ergebnis.
 
You must log in or register to reply here.
Back
Top