[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-46) ([email protected]) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sun Sep 23 10:07:46 UTC 2012
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=UUID=af23b497-363a-4a2f-9f64-c970d7af26ce ro
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf780000 (usable)
[ 0.000000] BIOS-e820: 00000000bf780000 - 00000000bf78e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf78e000 - 00000000bf7d0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf7d0000 - 00000000bf7e0000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf7ec000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000240000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x240000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-E3FFF write-protect
[ 0.000000] E4000-E7FFF write-through
[ 0.000000] E8000-EBFFF write-protect
[ 0.000000] EC000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 3 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbf780 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf780000
[ 0.000000] 0000000000 - 00bf600000 page 2M
[ 0.000000] 00bf600000 - 00bf780000 page 4k
[ 0.000000] kernel direct mapping tables up to bf780000 @ 10000-15000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000240000000
[ 0.000000] 0100000000 - 0240000000 page 2M
[ 0.000000] kernel direct mapping tables up to 240000000 @ 13000-1d000
[ 0.000000] RAMDISK: 375b9000 - 37fef461
[ 0.000000] ACPI: RSDP 00000000000fa4c0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000bf780000 0003C (v01 7522MS A7522800 20100909 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bf780200 00084 (v01 7522MS A7522800 20100909 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bf780480 06D1A (v01 A7522 A7522800 00000800 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000bf78e000 00040
[ 0.000000] ACPI: APIC 00000000bf780390 000AC (v01 7522MS A7522800 20100909 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bf780440 0003C (v01 7522MS OEMMCFG 20100909 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bf78e040 0007A (v01 7522MS A7522800 20100909 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000bf78a480 00038 (v01 7522MS OEMHPET 20100909 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bf790560 00363 (v01 DpgPmm CpuPm 00000012 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000240000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000240000000
[ 0.000000] NODE_DATA [0000000000018000 - 000000000001ffff]
[ 0.000000] bootmap [0000000000020000 - 0000000000067fff] pages 48
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0240000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 00016d9584] TEXT DATA BSS ==> [0001000000 - 00016d9584]
[ 0.000000] #3 [00375b9000 - 0037fef461] RAMDISK ==> [00375b9000 - 0037fef461]
[ 0.000000] #4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000]
[ 0.000000] #5 [00016da000 - 00016da12b] BRK ==> [00016da000 - 00016da12b]
[ 0.000000] #6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000]
[ 0.000000] #7 [0000013000 - 0000018000] PGTABLE ==> [0000013000 - 0000018000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880001800000-ffff8800087fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00240000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000bf780
[ 0.000000] 0: 0x00100000 -> 0x00240000
[ 0.000000] On node 0 totalpages: 2094862
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 108 pages reserved
[ 0.000000] DMA zone: 3818 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 765880 pages, LIFO batch:31
[ 0.000000] Normal zone: 17920 pages used for memmap
[ 0.000000] Normal zone: 1292800 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] SMP: Allowing 12 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bf780000 - 00000000bf78e000
[ 0.000000] PM: Registered nosave memory: 00000000bf78e000 - 00000000bf7d0000
[ 0.000000] PM: Registered nosave memory: 00000000bf7d0000 - 00000000bf7e0000
[ 0.000000] PM: Registered nosave memory: 00000000bf7e0000 - 00000000bf7ec000
[ 0.000000] PM: Registered nosave memory: 00000000bf7ec000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffc00000
[ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:12 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880008a00000 s90328 r8192 d24360 u131072
[ 0.000000] pcpu-alloc: s90328 r8192 d24360 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- --
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2062498
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=UUID=af23b497-363a-4a2f-9f64-c970d7af26ce ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff880008b7e000 - ffff88000cb7e000
[ 0.000000] software IO TLB at phys 0x8b7e000 - 0xcb7e000
[ 0.000000] Memory: 8179452k/9437184k available (3083k kernel code, 1057736k absent, 199996k reserved, 2048k data, 592k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:504
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 2807.020 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5614.04 BogoMIPS (lpj=11228080)
[ 0.000131] Security Framework initialized
[ 0.000191] SELinux: Disabled at boot.
[ 0.000736] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002449] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003280] Mount-cache hash table entries: 256
[ 0.003442] Initializing cgroup subsys ns
[ 0.003499] Initializing cgroup subsys cpuacct
[ 0.003559] Initializing cgroup subsys devices
[ 0.003616] Initializing cgroup subsys freezer
[ 0.003673] Initializing cgroup subsys net_cls
[ 0.003745] CPU: Physical Processor ID: 0
[ 0.003801] CPU: Processor Core ID: 0
[ 0.003858] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.003949] CPU: L2 cache: 256K
[ 0.004003] CPU: L3 cache: 8192K
[ 0.004060] CPU 0/0x0 -> Node 0
[ 0.004115] mce: CPU supports 9 MCE banks
[ 0.004182] CPU0: Thermal monitoring enabled (TM1)
[ 0.004242] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 SHD:8
[ 0.004509] using mwait in idle threads.
[ 0.004565] Performance Events: Nehalem/Corei7 events, Intel PMU driver.
[ 0.004712] ... version: 3
[ 0.004768] ... bit width: 48
[ 0.004824] ... generic registers: 4
[ 0.004880] ... value mask: 0000ffffffffffff
[ 0.004939] ... max period: 000000007fffffff
[ 0.004997] ... fixed-purpose events: 3
[ 0.005053] ... event mask: 000000070000000f
[ 0.005880] ACPI: Core revision 20090903
[ 0.035073] Setting APIC routing to physical flat
[ 0.035449] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.075104] CPU0: Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz stepping 05
[ 0.180398] Booting processor 1 APIC 0x2 ip 0x6000
[ 0.191067] Initializing CPU#1
[ 0.268110] CPU: Physical Processor ID: 0
[ 0.268111] CPU: Processor Core ID: 1
[ 0.268114] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.268115] CPU: L2 cache: 256K
[ 0.268116] CPU: L3 cache: 8192K
[ 0.268118] CPU 1/0x2 -> Node 0
[ 0.268131] CPU1: Thermal monitoring enabled (TM1)
[ 0.268135] CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.268203] CPU1: Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz stepping 05
[ 0.268829] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.288955] Booting processor 2 APIC 0x4 ip 0x6000
[ 0.299278] Initializing CPU#2
[ 0.375867] CPU: Physical Processor ID: 0
[ 0.375868] CPU: Processor Core ID: 2
[ 0.375870] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.375872] CPU: L2 cache: 256K
[ 0.375873] CPU: L3 cache: 8192K
[ 0.375875] CPU 2/0x4 -> Node 0
[ 0.375888] CPU2: Thermal monitoring enabled (TM1)
[ 0.375891] CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.375958] CPU2: Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz stepping 05
[ 0.381626] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.401751] Booting processor 3 APIC 0x6 ip 0x6000
[ 0.412074] Initializing CPU#3
[ 0.491606] CPU: Physical Processor ID: 0
[ 0.491607] CPU: Processor Core ID: 3
[ 0.491609] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.491611] CPU: L2 cache: 256K
[ 0.491612] CPU: L3 cache: 8192K
[ 0.491614] CPU 3/0x6 -> Node 0
[ 0.491627] CPU3: Thermal monitoring enabled (TM1)
[ 0.491630] CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 0.491648] CPU3: Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz stepping 05
[ 0.492275] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.512398] Booting processor 4 APIC 0x1 ip 0x6000
[ 0.522718] Initializing CPU#4
[ 0.599364] CPU: Physical Processor ID: 0
[ 0.599365] CPU: Processor Core ID: 0
[ 0.599367] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.599368] CPU: L2 cache: 256K
[ 0.599369] CPU: L3 cache: 8192K
[ 0.599371] CPU 4/0x1 -> Node 0
[ 0.599382] CPU4: Thermal monitoring enabled (TM1)
[ 0.599385] CPU 4 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 0.599409] CPU4: Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz stepping 05
[ 0.600035] checking TSC synchronization [CPU#0 -> CPU#4]: passed.
[ 0.620153] Booting processor 5 APIC 0x3 ip 0x6000
[ 0.630470] Initializing CPU#5
[ 0.707120] CPU: Physical Processor ID: 0
[ 0.707121] CPU: Processor Core ID: 1
[ 0.707123] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.707124] CPU: L2 cache: 256K
[ 0.707125] CPU: L3 cache: 8192K
[ 0.707126] CPU 5/0x3 -> Node 0
[ 0.707136] CPU5: Thermal monitoring enabled (TM1)
[ 0.707138] CPU 5 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 0.707156] CPU5: Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz stepping 05
[ 0.707779] checking TSC synchronization [CPU#0 -> CPU#5]: passed.
[ 0.727893] Booting processor 6 APIC 0x5 ip 0x6000
[ 0.741015] Initializing CPU#6
[ 0.818868] CPU: Physical Processor ID: 0
[ 0.818869] CPU: Processor Core ID: 2
[ 0.818871] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.818872] CPU: L2 cache: 256K
[ 0.818872] CPU: L3 cache: 8192K
[ 0.818874] CPU 6/0x5 -> Node 0
[ 0.818883] CPU6: Thermal monitoring enabled (TM1)
[ 0.818886] CPU 6 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 0.818948] CPU6: Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz stepping 05
[ 0.819571] checking TSC synchronization [CPU#0 -> CPU#6]: passed.
[ 0.839689] Booting processor 7 APIC 0x7 ip 0x6000
[ 0.850002] Initializing CPU#7
[ 0.926625] CPU: Physical Processor ID: 0
[ 0.926626] CPU: Processor Core ID: 3
[ 0.926628] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.926629] CPU: L2 cache: 256K
[ 0.926630] CPU: L3 cache: 8192K
[ 0.926631] CPU 7/0x7 -> Node 0
[ 0.926640] CPU7: Thermal monitoring enabled (TM1)
[ 0.926642] CPU 7 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
[ 0.926692] CPU7: Intel(R) Core(TM) i7 CPU 930 @ 2.80GHz stepping 05
[ 0.927314] checking TSC synchronization [CPU#0 -> CPU#7]: passed.
[ 0.947384] Brought up 8 CPUs
[ 0.947439] Total of 8 processors activated (44910.43 BogoMIPS).
[ 0.951048] CPU0 attaching sched-domain:
[ 0.951050] domain 0: span 0,4 level SIBLING
[ 0.951052] groups: group ffff880008a0fae0 cpus 0 (cpu_power = 589) group ffff880008a8fae0 cpus 4 (cpu_power = 589)
[ 0.951057] domain 1: span 0-7 level MC
[ 0.951058] groups: group ffff880008a0fbf0 cpus 0,4 (cpu_power = 1178) group ffff880008a2fbf0 cpus 1,5 (cpu_power = 1178) group ffff880008a4fbf0 cpus 2,6 (cpu_power = 1178) group ffff880008a6fbf0 cpus 3,7 (cpu_power = 1178)
[ 0.951067] CPU1 attaching sched-domain:
[ 0.951068] domain 0: span 1,5 level SIBLING
[ 0.951070] groups: group ffff880008a2fae0 cpus 1 (cpu_power = 589) group ffff880008aafae0 cpus 5 (cpu_power = 589)
[ 0.951074] domain 1: span 0-7 level MC
[ 0.951075] groups: group ffff880008a2fbf0 cpus 1,5 (cpu_power = 1178) group ffff880008a4fbf0 cpus 2,6 (cpu_power = 1178) group ffff880008a6fbf0 cpus 3,7 (cpu_power = 1178) group ffff880008a0fbf0 cpus 0,4 (cpu_power = 1178)
[ 0.951083] CPU2 attaching sched-domain:
[ 0.951084] domain 0: span 2,6 level SIBLING
[ 0.951085] groups: group ffff880008a4fae0 cpus 2 (cpu_power = 589) group ffff880008acfae0 cpus 6 (cpu_power = 589)
[ 0.951089] domain 1: span 0-7 level MC
[ 0.951091] groups: group ffff880008a4fbf0 cpus 2,6 (cpu_power = 1178) group ffff880008a6fbf0 cpus 3,7 (cpu_power = 1178) group ffff880008a0fbf0 cpus 0,4 (cpu_power = 1178) group ffff880008a2fbf0 cpus 1,5 (cpu_power = 1178)
[ 0.951098] CPU3 attaching sched-domain:
[ 0.951099] domain 0: span 3,7 level SIBLING
[ 0.951101] groups: group ffff880008a6fae0 cpus 3 (cpu_power = 589) group ffff880008aefae0 cpus 7 (cpu_power = 589)
[ 0.951105] domain 1: span 0-7 level MC
[ 0.951106] groups: group ffff880008a6fbf0 cpus 3,7 (cpu_power = 1178) group ffff880008a0fbf0 cpus 0,4 (cpu_power = 1178) group ffff880008a2fbf0 cpus 1,5 (cpu_power = 1178) group ffff880008a4fbf0 cpus 2,6 (cpu_power = 1178)
[ 0.951113] CPU4 attaching sched-domain:
[ 0.951115] domain 0: span 0,4 level SIBLING
[ 0.951116] groups: group ffff880008a8fae0 cpus 4 (cpu_power = 589) group ffff880008a0fae0 cpus 0 (cpu_power = 589)
[ 0.951120] domain 1: span 0-7 level MC
[ 0.951121] groups: group ffff880008a0fbf0 cpus 0,4 (cpu_power = 1178) group ffff880008a2fbf0 cpus 1,5 (cpu_power = 1178) group ffff880008a4fbf0 cpus 2,6 (cpu_power = 1178) group ffff880008a6fbf0 cpus 3,7 (cpu_power = 1178)
[ 0.951129] CPU5 attaching sched-domain:
[ 0.951130] domain 0: span 1,5 level SIBLING
[ 0.951131] groups: group ffff880008aafae0 cpus 5 (cpu_power = 589) group ffff880008a2fae0 cpus 1 (cpu_power = 589)
[ 0.951135] domain 1: span 0-7 level MC
[ 0.951137] groups: group ffff880008a2fbf0 cpus 1,5 (cpu_power = 1178) group ffff880008a4fbf0 cpus 2,6 (cpu_power = 1178) group ffff880008a6fbf0 cpus 3,7 (cpu_power = 1178) group ffff880008a0fbf0 cpus 0,4 (cpu_power = 1178)
[ 0.951144] CPU6 attaching sched-domain:
[ 0.951145] domain 0: span 2,6 level SIBLING
[ 0.951147] groups: group ffff880008acfae0 cpus 6 (cpu_power = 589) group ffff880008a4fae0 cpus 2 (cpu_power = 589)
[ 0.951151] domain 1: span 0-7 level MC
[ 0.951152] groups: group ffff880008a4fbf0 cpus 2,6 (cpu_power = 1178) group ffff880008a6fbf0 cpus 3,7 (cpu_power = 1178) group ffff880008a0fbf0 cpus 0,4 (cpu_power = 1178) group ffff880008a2fbf0 cpus 1,5 (cpu_power = 1178)
[ 0.951160] CPU7 attaching sched-domain:
[ 0.951161] domain 0: span 3,7 level SIBLING
[ 0.951162] groups: group ffff880008aefae0 cpus 7 (cpu_power = 589) group ffff880008a6fae0 cpus 3 (cpu_power = 589)
[ 0.951166] domain 1: span 0-7 level MC
[ 0.951167] groups: group ffff880008a6fbf0 cpus 3,7 (cpu_power = 1178) group ffff880008a0fbf0 cpus 0,4 (cpu_power = 1178) group ffff880008a2fbf0 cpus 1,5 (cpu_power = 1178) group ffff880008a4fbf0 cpus 2,6 (cpu_power = 1178)
[ 0.951476] devtmpfs: initialized
[ 0.954782] regulator: core version 0.5
[ 0.954872] NET: Registered protocol family 16
[ 0.954988] ACPI: bus type pci registered
[ 0.955092] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.955154] PCI: Not using MMCONFIG.
[ 0.955208] PCI: Using configuration type 1 for base access
[ 0.955695] bio: create slab <bio-0> at 0
[ 0.956311] ACPI: EC: Detected MSI hardware, enabling workarounds.
[ 0.956313] ACPI: EC: Look up EC in DSDT
[ 0.958037] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.964277] ACPI: Interpreter enabled
[ 0.964333] ACPI: (supports S0 S1 S4 S5)
[ 0.964536] ACPI: Using IOAPIC for interrupt routing
[ 0.964631] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.966349] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.971959] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.978533] ACPI Warning: Incorrect checksum in table [OEMB] - C6, should be C5 (20090903/tbutils-314)
[ 0.978771] ACPI: No dock devices found.
[ 0.978943] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.979072] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.979133] pci 0000:00:00.0: PME# disabled
[ 0.979257] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.979319] pci 0000:00:01.0: PME# disabled
[ 0.979441] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.979502] pci 0000:00:03.0: PME# disabled
[ 0.979626] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.979687] pci 0000:00:07.0: PME# disabled
[ 0.979962] pci 0000:00:1a.0: reg 20 io port: [0xbc00-0xbc1f]
[ 0.980030] pci 0000:00:1a.1: reg 20 io port: [0xb880-0xb89f]
[ 0.980097] pci 0000:00:1a.2: reg 20 io port: [0xb800-0xb81f]
[ 0.980168] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf9ffe000-0xf9ffe3ff]
[ 0.980232] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.980294] pci 0000:00:1a.7: PME# disabled
[ 0.980417] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.980479] pci 0000:00:1c.0: PME# disabled
[ 0.980604] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.980666] pci 0000:00:1c.4: PME# disabled
[ 0.980768] pci 0000:00:1d.0: reg 20 io port: [0xb480-0xb49f]
[ 0.980835] pci 0000:00:1d.1: reg 20 io port: [0xb400-0xb41f]
[ 0.980902] pci 0000:00:1d.2: reg 20 io port: [0xb080-0xb09f]
[ 0.980973] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf9ffc000-0xf9ffc3ff]
[ 0.981038] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.981100] pci 0000:00:1d.7: PME# disabled
[ 0.981273] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
[ 0.981351] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0a00 (mask 0017)
[ 0.981429] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 00ff)
[ 0.981568] pci 0000:00:1f.2: reg 10 io port: [0xb000-0xb007]
[ 0.981573] pci 0000:00:1f.2: reg 14 io port: [0xac00-0xac03]
[ 0.981577] pci 0000:00:1f.2: reg 18 io port: [0xa880-0xa887]
[ 0.981582] pci 0000:00:1f.2: reg 1c io port: [0xa800-0xa803]
[ 0.981586] pci 0000:00:1f.2: reg 20 io port: [0xa480-0xa49f]
[ 0.981591] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf9ffa000-0xf9ffa7ff]
[ 0.981630] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.981689] pci 0000:00:1f.2: PME# disabled
[ 0.981768] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf9ff9c00-0xf9ff9cff]
[ 0.981779] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.981843] pci 0000:02:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
[ 0.981850] pci 0000:02:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.981857] pci 0000:02:00.0: reg 1c 64bit mmio pref: [0xce000000-0xcfffffff]
[ 0.981862] pci 0000:02:00.0: reg 24 io port: [0xcc00-0xcc7f]
[ 0.981866] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfbc80000-0xfbcfffff]
[ 0.981927] pci 0000:02:00.1: reg 10 32bit mmio: [0xfbc7c000-0xfbc7ffff]
[ 0.986569] pci 0000:00:03.0: bridge io port: [0xc000-0xcfff]
[ 0.986573] pci 0000:00:03.0: bridge 32bit mmio: [0xfa000000-0xfbcfffff]
[ 0.986581] pci 0000:00:03.0: bridge 64bit mmio pref: [0xce000000-0xdfffffff]
[ 0.986679] pci 0000:06:00.0: reg 10 io port: [0xe800-0xe8ff]
[ 0.986697] pci 0000:06:00.0: reg 18 64bit mmio: [0xfbeff000-0xfbefffff]
[ 0.986710] pci 0000:06:00.0: reg 20 64bit mmio pref: [0xf8ff0000-0xf8ffffff]
[ 0.986717] pci 0000:06:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.986778] pci 0000:06:00.0: supports D1 D2
[ 0.986779] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.986843] pci 0000:06:00.0: PME# disabled
[ 0.994575] pci 0000:00:1c.4: bridge io port: [0xe000-0xefff]
[ 0.994578] pci 0000:00:1c.4: bridge 32bit mmio: [0xfbe00000-0xfbefffff]
[ 0.994583] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xf8f00000-0xf8ffffff]
[ 0.994624] pci 0000:00:1e.0: transparent bridge
[ 0.994708] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.994940] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.995028] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.995078] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 0.995138] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
[ 0.995180] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
[ 0.995222] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
[ 1.001065] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 1.001581] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 1.001823] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 1.002337] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 1.002856] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 1.003455] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 1.003969] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 1.004566] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 6 7 10 11 12 14 15)
[ 1.005066] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.005145] vgaarb: loaded
[ 1.005235] PCI: Using ACPI for IRQ routing
[ 1.005407] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 1.005472] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 1.005699] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 1.027242] Switching to clocksource tsc
[ 1.028159] pnp: PnP ACPI init
[ 1.028219] ACPI: bus type pnp registered
[ 1.030293] pnp: PnP ACPI: found 14 devices
[ 1.030350] ACPI: ACPI bus type pnp unregistered
[ 1.030412] system 00:01: iomem range 0xfbf00000-0xfbffffff has been reserved
[ 1.030478] system 00:01: iomem range 0xfc000000-0xfcffffff has been reserved
[ 1.030540] system 00:01: iomem range 0xfd000000-0xfdffffff has been reserved
[ 1.030602] system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved
[ 1.030663] system 00:01: iomem range 0xfec8a000-0xfec8afff has been reserved
[ 1.030725] system 00:01: iomem range 0xfed10000-0xfed10fff has been reserved
[ 1.030790] system 00:08: ioport range 0xa00-0xadf has been reserved
[ 1.030851] system 00:08: ioport range 0xae0-0xaef has been reserved
[ 1.030913] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[ 1.030973] system 00:09: ioport range 0x800-0x87f has been reserved
[ 1.031034] system 00:09: ioport range 0x500-0x57f has been reserved
[ 1.031094] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 1.031156] system 00:09: iomem range 0xfed10000-0xfed103ff has been reserved
[ 1.031221] system 00:09: iomem range 0xfed10400-0xfed107ff has been reserved
[ 1.031283] system 00:09: iomem range 0xfed10800-0xfed10bff has been reserved
[ 1.031345] system 00:09: iomem range 0xfed10c00-0xfed10fff has been reserved
[ 1.031407] system 00:09: iomem range 0xfec8a000-0xfec8a3ff has been reserved
[ 1.031469] system 00:09: iomem range 0xfec8a400-0xfec8a7ff has been reserved
[ 1.031531] system 00:09: iomem range 0xfec8a800-0xfec8abff has been reserved
[ 1.031593] system 00:09: iomem range 0xfec8ac00-0xfec8afff has been reserved
[ 1.031655] system 00:09: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 1.031717] system 00:09: iomem range 0xfed45000-0xfed89fff has been reserved
[ 1.031779] system 00:09: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 1.031841] system 00:09: iomem range 0xfed40000-0xfed8ffff could not be reserved
[ 1.031921] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 1.031997] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
[ 1.032061] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
[ 1.032124] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 1.032185] system 00:0d: iomem range 0xc0000-0xcffff could not be reserved
[ 1.032246] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[ 1.032308] system 00:0d: iomem range 0x100000-0xbfffffff could not be reserved
[ 1.032384] system 00:0d: iomem range 0xfed90000-0xffffffff could not be reserved
[ 1.037141] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 1.037201] pci 0000:00:01.0: IO window: disabled
[ 1.037260] pci 0000:00:01.0: MEM window: disabled
[ 1.037319] pci 0000:00:01.0: PREFETCH window: disabled
[ 1.037380] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
[ 1.037440] pci 0000:00:03.0: IO window: 0xc000-0xcfff
[ 1.037500] pci 0000:00:03.0: MEM window: 0xfa000000-0xfbcfffff
[ 1.037561] pci 0000:00:03.0: PREFETCH window: 0x000000ce000000-0x000000dfffffff
[ 1.037639] pci 0000:00:07.0: PCI bridge, secondary bus 0000:03
[ 1.037698] pci 0000:00:07.0: IO window: disabled
[ 1.037757] pci 0000:00:07.0: MEM window: disabled
[ 1.042844] pci 0000:00:07.0: PREFETCH window: disabled
[ 1.042905] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
[ 1.042965] pci 0000:00:1c.0: IO window: 0x1000-0x1fff
[ 1.043025] pci 0000:00:1c.0: MEM window: 0xc0000000-0xc01fffff
[ 1.043086] pci 0000:00:1c.0: PREFETCH window: 0x000000c0200000-0x000000c03fffff
[ 1.043166] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:06
[ 1.043227] pci 0000:00:1c.4: IO window: 0xe000-0xefff
[ 1.043287] pci 0000:00:1c.4: MEM window: 0xfbe00000-0xfbefffff
[ 1.043348] pci 0000:00:1c.4: PREFETCH window: 0x000000f8f00000-0x000000f8ffffff
[ 1.043428] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:07
[ 1.043487] pci 0000:00:1e.0: IO window: disabled
[ 1.043546] pci 0000:00:1e.0: MEM window: disabled
[ 1.043605] pci 0000:00:1e.0: PREFETCH window: disabled
[ 1.043672] pci 0000:00:01.0: setting latency timer to 64
[ 1.043678] pci 0000:00:03.0: setting latency timer to 64
[ 1.043684] pci 0000:00:07.0: setting latency timer to 64
[ 1.043690] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[ 1.043750] alloc irq_desc for 17 on node -1
[ 1.043752] alloc kstat_irqs on node -1
[ 1.043757] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.043820] pci 0000:00:1c.0: setting latency timer to 64
[ 1.043826] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.043888] pci 0000:00:1c.4: setting latency timer to 64
[ 1.043893] pci 0000:00:1e.0: setting latency timer to 64
[ 1.043896] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 1.043897] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 1.043899] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff]
[ 1.043901] pci_bus 0000:02: resource 1 mem: [0xfa000000-0xfbcfffff]
[ 1.043902] pci_bus 0000:02: resource 2 pref mem [0xce000000-0xdfffffff]
[ 1.043904] pci_bus 0000:04: resource 0 io: [0x1000-0x1fff]
[ 1.043906] pci_bus 0000:04: resource 1 mem: [0xc0000000-0xc01fffff]
[ 1.043907] pci_bus 0000:04: resource 2 pref mem [0xc0200000-0xc03fffff]
[ 1.043909] pci_bus 0000:06: resource 0 io: [0xe000-0xefff]
[ 1.043910] pci_bus 0000:06: resource 1 mem: [0xfbe00000-0xfbefffff]
[ 1.043912] pci_bus 0000:06: resource 2 pref mem [0xf8f00000-0xf8ffffff]
[ 1.043913] pci_bus 0000:07: resource 3 io: [0x00-0xffff]
[ 1.043915] pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 1.043932] NET: Registered protocol family 2
[ 1.044138] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 1.044922] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.046314] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.046595] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.046656] TCP reno registered
[ 1.046798] NET: Registered protocol family 1
[ 1.046878] alloc irq_desc for 16 on node -1
[ 1.046880] alloc kstat_irqs on node -1
[ 1.046885] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.046960] pci 0000:00:1a.0: PCI INT A disabled
[ 1.047020] alloc irq_desc for 21 on node -1
[ 1.047021] alloc kstat_irqs on node -1
[ 1.047024] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.047098] pci 0000:00:1a.1: PCI INT B disabled
[ 1.047157] alloc irq_desc for 19 on node -1
[ 1.047158] alloc kstat_irqs on node -1
[ 1.047161] pci 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.047235] pci 0000:00:1a.2: PCI INT D disabled
[ 1.047299] alloc irq_desc for 18 on node -1
[ 1.047301] alloc kstat_irqs on node -1
[ 1.047304] pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.047385] pci 0000:00:1a.7: PCI INT C disabled
[ 1.047446] alloc irq_desc for 23 on node -1
[ 1.047447] alloc kstat_irqs on node -1
[ 1.047450] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.047524] pci 0000:00:1d.0: PCI INT A disabled
[ 1.047584] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.047657] pci 0000:00:1d.1: PCI INT B disabled
[ 1.047717] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.047790] pci 0000:00:1d.2: PCI INT C disabled
[ 1.047853] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.047930] pci 0000:00:1d.7: PCI INT A disabled
[ 1.048001] pci 0000:02:00.0: Boot video device
[ 1.048039] Unpacking initramfs...
[ 1.217038] Freeing initrd memory: 10457k freed
[ 1.218978] audit: initializing netlink socket (disabled)
[ 1.219045] type=2000 audit(1358497356.987:1): initialized
[ 1.221859] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.222843] VFS: Disk quotas dquot_6.5.2
[ 1.222931] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.223048] msgmni has been set to 15995
[ 1.223285] alg: No test for stdrng (krng)
[ 1.223372] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.223449] io scheduler noop registered
[ 1.223504] io scheduler anticipatory registered
[ 1.223561] io scheduler deadline registered
[ 1.223651] io scheduler cfq registered (default)
[ 1.223797] alloc irq_desc for 24 on node -1
[ 1.223799] alloc kstat_irqs on node -1
[ 1.223806] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 1.223812] pcieport 0000:00:01.0: setting latency timer to 64
[ 1.223897] alloc irq_desc for 25 on node -1
[ 1.223898] alloc kstat_irqs on node -1
[ 1.223903] pcieport 0000:00:03.0: irq 25 for MSI/MSI-X
[ 1.223908] pcieport 0000:00:03.0: setting latency timer to 64
[ 1.223990] alloc irq_desc for 26 on node -1
[ 1.223991] alloc kstat_irqs on node -1
[ 1.223996] pcieport 0000:00:07.0: irq 26 for MSI/MSI-X
[ 1.224001] pcieport 0000:00:07.0: setting latency timer to 64
[ 1.224082] alloc irq_desc for 27 on node -1
[ 1.224083] alloc kstat_irqs on node -1
[ 1.224088] pcieport 0000:00:1c.0: irq 27 for MSI/MSI-X
[ 1.224094] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.224183] alloc irq_desc for 28 on node -1
[ 1.224184] alloc kstat_irqs on node -1
[ 1.224190] pcieport 0000:00:1c.4: irq 28 for MSI/MSI-X
[ 1.224196] pcieport 0000:00:1c.4: setting latency timer to 64
[ 1.224259] aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.224265] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.224268] aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.225122] Linux agpgart interface v0.103
[ 1.225204] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.225346] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.225609] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.225792] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.225902] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.225962] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.226663] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.226763] mice: PS/2 mouse device common for all mice
[ 1.226846] rtc_cmos 00:03: RTC can wake from S4
[ 1.226925] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.227006] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.227073] cpuidle: using governor ladder
[ 1.227129] cpuidle: using governor menu
[ 1.227186] No iBFT detected.
[ 1.227444] TCP cubic registered
[ 1.227567] NET: Registered protocol family 10
[ 1.228130] Mobile IPv6
[ 1.228184] NET: Registered protocol family 17
[ 1.228286] PM: Resume from disk failed.
[ 1.228291] registered taskstats version 1
[ 1.228724] rtc_cmos 00:03: setting system clock to 2013-01-18 08:22:37 UTC (1358497357)
[ 1.228830] Initalizing network drop monitor service
[ 1.228908] Freeing unused kernel memory: 592k freed
[ 1.229050] Write protecting the kernel read-only data: 4240k
[ 1.238147] udev[116]: starting version 164
[ 1.249715] ACPI: SSDT 00000000bf78e0c0 01E1C (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 1.250430] ACPI: SSDT 00000000bf78fee0 00678 (v01 PmRef P001Cst 00003001 INTL 20051117)
[ 1.262574] Monitor-Mwait will be used to enter C-1 state
[ 1.262718] Monitor-Mwait will be used to enter C-2 state
[ 1.263683] usbcore: registered new interface driver usbfs
[ 1.263777] usbcore: registered new interface driver hub
[ 1.265233] Monitor-Mwait will be used to enter C-3 state
[ 1.265307] usbcore: registered new device driver usb
[ 1.265318] processor LNXCPU:00: registered as cooling_device0
[ 1.266035] processor LNXCPU:01: registered as cooling_device1
[ 1.266341] processor LNXCPU:02: registered as cooling_device2
[ 1.266632] processor LNXCPU:03: registered as cooling_device3
[ 1.272397] SCSI subsystem initialized
[ 1.273705] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.273781] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.273869] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.273871] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.273947] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.274048] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.274984] processor LNXCPU:04: registered as cooling_device4
[ 1.275036] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.275054] r8169 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.275193] r8169 0000:06:00.0: setting latency timer to 64
[ 1.275243] alloc irq_desc for 29 on node -1
[ 1.275245] alloc kstat_irqs on node -1
[ 1.275260] r8169 0000:06:00.0: irq 29 for MSI/MSI-X
[ 1.275431] processor LNXCPU:05: registered as cooling_device5
[ 1.275662] r8169 0000:06:00.0: eth0: RTL8168c/8111c at 0xffffc90000c4c000, 6c:62:6d:a0:71:01, XID 1c4000c0 IRQ 29
[ 1.277988] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.278003] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9ffe000
[ 1.280457] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 1.282323] processor LNXCPU:06: registered as cooling_device6
[ 1.282782] processor LNXCPU:07: registered as cooling_device7
[ 1.285838] libata version 3.00 loaded.
[ 1.291936] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.292038] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.292107] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.292183] usb usb1: Product: EHCI Host Controller
[ 1.292240] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 1.292299] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.292403] usb usb1: configuration #1 chosen from 1 choice
[ 1.292480] hub 1-0:1.0: USB hub found
[ 1.292539] hub 1-0:1.0: 6 ports detected
[ 1.292635] ahci 0000:00:1f.2: version 3.0
[ 1.292644] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.292974] alloc irq_desc for 30 on node -1
[ 1.292976] alloc kstat_irqs on node -1
[ 1.292985] ahci 0000:00:1f.2: irq 30 for MSI/MSI-X
[ 1.293014] ahci: SSS flag set, parallel bus scan disabled
[ 1.293107] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 1.293185] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
[ 1.293265] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.331415] scsi0 : ahci
[ 1.331689] scsi1 : ahci
[ 1.331978] scsi2 : ahci
[ 1.332243] scsi3 : ahci
[ 1.332513] scsi4 : ahci
[ 1.332750] scsi5 : ahci
[ 1.332939] ata1: SATA max UDMA/133 abar m2048@0xf9ffa000 port 0xf9ffa100 irq 30
[ 1.333017] ata2: SATA max UDMA/133 abar m2048@0xf9ffa000 port 0xf9ffa180 irq 30
[ 1.333093] ata3: SATA max UDMA/133 abar m2048@0xf9ffa000 port 0xf9ffa200 irq 30
[ 1.333170] ata4: SATA max UDMA/133 abar m2048@0xf9ffa000 port 0xf9ffa280 irq 30
[ 1.333247] ata5: SATA max UDMA/133 abar m2048@0xf9ffa000 port 0xf9ffa300 irq 30
[ 1.333323] ata6: SATA max UDMA/133 abar m2048@0xf9ffa000 port 0xf9ffa380 irq 30
[ 1.333418] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.333500] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.333503] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.333566] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.333663] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.337609] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.337619] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9ffc000
[ 1.351781] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.351863] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.351930] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.352012] usb usb2: Product: EHCI Host Controller
[ 1.352069] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 1.352128] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.352225] usb usb2: configuration #1 chosen from 1 choice
[ 1.352302] hub 2-0:1.0: USB hub found
[ 1.352360] hub 2-0:1.0: 6 ports detected
[ 1.364650] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.364731] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.364798] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.364800] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.364863] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.364965] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000bc00
[ 1.365047] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.365108] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.365184] usb usb3: Product: UHCI Host Controller
[ 1.365241] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 1.365301] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.365395] usb usb3: configuration #1 chosen from 1 choice
[ 1.365471] hub 3-0:1.0: USB hub found
[ 1.370555] hub 3-0:1.0: 2 ports detected
[ 1.370674] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.370740] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.370742] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.370804] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.370937] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[ 1.371028] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.371089] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.371168] usb usb4: Product: UHCI Host Controller
[ 1.371225] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 1.371284] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.371384] usb usb4: configuration #1 chosen from 1 choice
[ 1.371460] hub 4-0:1.0: USB hub found
[ 1.371519] hub 4-0:1.0: 2 ports detected
[ 1.371603] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.371700] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.371702] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.371763] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.371886] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000b800
[ 1.371965] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.372026] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.372102] usb usb5: Product: UHCI Host Controller
[ 1.372159] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 1.372219] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.372310] usb usb5: configuration #1 chosen from 1 choice
[ 1.372385] hub 5-0:1.0: USB hub found
[ 1.372443] hub 5-0:1.0: 2 ports detected
[ 1.372535] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.372601] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.372603] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.372664] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.372759] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b480
[ 1.372837] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.372899] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.372974] usb usb6: Product: UHCI Host Controller
[ 1.373031] usb usb6: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 1.373091] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.373181] usb usb6: configuration #1 chosen from 1 choice
[ 1.373255] hub 6-0:1.0: USB hub found
[ 1.373312] hub 6-0:1.0: 2 ports detected
[ 1.373396] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.373461] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.373464] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.373524] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.373619] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[ 1.373697] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.373758] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.373834] usb usb7: Product: UHCI Host Controller
[ 1.373891] usb usb7: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 1.373951] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.374043] usb usb7: configuration #1 chosen from 1 choice
[ 1.374119] hub 7-0:1.0: USB hub found
[ 1.374177] hub 7-0:1.0: 2 ports detected
[ 1.374260] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.374325] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.374328] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.374388] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.374483] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b080
[ 1.374560] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.374622] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.374731] usb usb8: Product: UHCI Host Controller
[ 1.374789] usb usb8: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 1.374882] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.374972] usb usb8: configuration #1 chosen from 1 choice
[ 1.375065] hub 8-0:1.0: USB hub found
[ 1.375127] hub 8-0:1.0: 2 ports detected
[ 1.650154] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.655906] ata1.00: ATA-8: SAMSUNG HD754JJ, 1AJ10001, max UDMA/133
[ 1.655974] ata1.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.661825] ata1.00: configured for UDMA/133
[ 1.674213] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD754JJ 1AJ1 PQ: 0 ANSI: 5
[ 2.396540] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.402435] ata2.00: ATA-8: SAMSUNG HD754JJ, 1AJ10001, max UDMA/133
[ 2.402502] ata2.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.408514] ata2.00: configured for UDMA/133
[ 2.420592] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD754JJ 1AJ1 PQ: 0 ANSI: 5
[ 2.740609] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.075039] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.410303] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.745518] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.765111] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 3.765141] sd 1:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 3.765206] sd 1:0:0:0: [sdb] Write Protect is off
[ 3.765208] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.765280] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.765424] sdb:
[ 3.765483] sd 0:0:0:0: [sda] Write Protect is off
[ 3.765648] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.765677] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.765881] sda: sdb1 sdb2 sdb3
[ 3.773229] sda1 sda2 sda3
[ 3.773387] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 3.773979] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.987287] md: raid0 personality registered for level 0
[ 3.989676] md: raid1 personality registered for level 1
[ 3.991120] async_tx: api initialized (async)
[ 3.991482] xor: automatically using best checksumming function: generic_sse
[ 4.008883] generic_sse: 10530.000 MB/sec
[ 4.008940] xor: using function: generic_sse (10530.000 MB/sec)
[ 4.076753] raid6: int64x1 2826 MB/s
[ 4.144590] raid6: int64x2 3590 MB/s
[ 4.212440] raid6: int64x4 2548 MB/s
[ 4.280305] raid6: int64x8 2469 MB/s
[ 4.348144] raid6: sse2x1 6982 MB/s
[ 4.415991] raid6: sse2x2 8139 MB/s
[ 4.483841] raid6: sse2x4 9333 MB/s
[ 4.483897] raid6: using algorithm sse2x4 (9333 MB/s)
[ 4.486651] md: raid6 personality registered for level 6
[ 4.486710] md: raid5 personality registered for level 5
[ 4.486767] md: raid4 personality registered for level 4
[ 4.490326] md: raid10 personality registered for level 10
[ 4.492177] 3ware Storage Controller device driver for Linux v1.26.02.002.
[ 4.494291] 3ware 9000 Storage Controller device driver for Linux v2.26.02.013.
[ 4.496858] Adaptec aacraid driver 1.1-7[28000]-ms
[ 4.536021] mdadm: sending ioctl 1261 to a partition!
[ 4.536124] mdadm: sending ioctl 1261 to a partition!
[ 4.536386] mdadm: sending ioctl 1261 to a partition!
[ 4.536445] mdadm: sending ioctl 1261 to a partition!
[ 4.558308] mdadm: sending ioctl 1261 to a partition!
[ 4.558374] mdadm: sending ioctl 1261 to a partition!
[ 4.558510] mdadm: sending ioctl 1261 to a partition!
[ 4.558574] mdadm: sending ioctl 1261 to a partition!
[ 4.558715] mdadm: sending ioctl 800c0910 to a partition!
[ 4.558780] mdadm: sending ioctl 800c0910 to a partition!
[ 4.561715] md: md0 stopped.
[ 4.562792] md: bind<sdb1>
[ 4.562952] md: bind<sda1>
[ 4.564512] raid1: raid set md0 active with 2 out of 2 mirrors
[ 4.564603] md0: detected capacity change from 0 to 2146369536
[ 4.565408] md0: unknown partition table
[ 4.642275] md: md1 stopped.
[ 4.670346] md: bind<sdb2>
[ 4.670560] md: bind<sda2>
[ 4.671820] raid1: raid set md1 active with 2 out of 2 mirrors
[ 4.671954] md1: detected capacity change from 0 to 536805376
[ 4.672728] md1: unknown partition table
[ 4.716548] md: md2 stopped.
[ 4.719941] md: bind<sdb3>
[ 4.720113] md: bind<sda3>
[ 4.721333] raid1: md2 is not clean -- starting background reconstruction
[ 4.721395] raid1: raid set md2 active with 2 out of 2 mirrors
[ 4.721465] md2: detected capacity change from 0 to 747471044608
[ 4.722068] md2: unknown partition table
[ 4.726564] device-mapper: uevent: version 1.0.3
[ 4.726713] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [email protected]
......