bernd_h_schulz
New Member
Der Server ist nicht mehr erreichbar. Laut Support sind die Festplatten nicht defekt. Der Reboot über die serielle Konsole liefert:
parted liefert
Wie komme ich hier weiter?
MfG
Bernd
LILO 22.3.4 boot:
Loading lxser.....................................
BIOS data check successful
Bootdata ok (command line is auto BOOT_IMAGE=lxser ro root=901 console=tty0 console=ttyS0,57600 panic=30)
Linux version 2.6.14.3-051207a (root@linux-images64) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #1 SMP Wed Dec 7 12:17:16 CET 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003dee0000 (usable)
BIOS-e820: 000000003dee0000 - 000000003deef000 (ACPI data)
BIOS-e820: 000000003deef000 - 000000003df00000 (ACPI NVS)
BIOS-e820: 000000003df00000 - 0000000040000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Scanning NUMA topology in Northbridge 24
Number of nodes 1
Node 0 MemBase 0000000000000000 Limit 000000003dee0000
Using node hash shift of 20
Bootmem setup node 0 0000000000000000-000000003dee0000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:15 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 20, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
Checking aperture...
CPU 0: aperture @ f8000000 size 64 MB
Built 1 zonelists
Kernel command line: auto BOOT_IMAGE=lxser ro root=901 console=tty0 console=ttyS0,57600 panic=30
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
time.c: Using 1.193182 MHz PIT timer.
time.c: Detected 2000.086 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Memory: 994140k/1014656k available (2778k kernel code, 20128k reserved, 1063k data, 288k init)
Calibrating delay using timer specific routine.. 4004.52 BogoMIPS (lpj=8009044)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0(1) -> Node 0 -> Core 0
mtrr: v2.0 (20020519)
Using local APIC timer interrupts.
Detected 12.500 MHz APIC timer.
Brought up 1 CPUs
time.c: Using PIT/TSC based timekeeping.
testing NMI watchdog ... OK.
softlockup thread 0 started up.
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
PCI: Using MMCONFIG at e0000000
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.5
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: Device [PS2M] status [00000008]: functional but not present; setting present
ACPI: Device [FDC] status [00000008]: functional but not present; setting present
ACPI: Device [LPT] status [00000008]: functional but not present; setting present
ACPI: Device [ECP] status [00000008]: functional but not present; setting present
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI-DMA: Disabling IOMMU.
PCI: Ignore bogus resource 6 [0:0] of 0000:01:00.0
PCI: Bridge: 0000:00:01.0
IO window: 2000-2fff
MEM window: fa100000-fa1fffff
PREFETCH window: f0000000-f7ffffff
PCI: Bridge: 0000:00:06.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1f.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
Simple Boot Flag at 0x69 set to 0x80
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SGI XFS with ACLs, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
ACPI: CPU0 (power states: C1[C1])
Real Time Clock Driver v1.12
Linux agpgart interface v0.101 (c) Dave Jones
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Intel(R) PRO/1000 Network Driver - version 6.0.60-k2-NAPI
Copyright (c) 1999-2005 Intel Corporation.
e100: Intel(R) PRO/100 Network Driver, 3.4.14-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 19 (level, low) -> IRQ 16
eth0: RTL8169 at 0xffffc20000004000, 00:30:05:b8:2c:e6, IRQ 16
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 17
SIS5513: chipset revision 1
SIS5513: not 100% native mode: will probe irqs later
SIS5513: IDE controller at PCI slot 0000:00:02.5
ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 17
SIS5513: chipset revision 1
SIS5513: not 100% native mode: will probe irqs later
SIS_IDE: probe of 0000:00:02.5 failed with error -1
Adaptec aacraid driver (1.1-4 Dec 7 2005 12:16:57)
3ware Storage Controller device driver for Linux v1.26.02.001.
3ware 9000 Storage Controller device driver for Linux v2.26.02.004.
ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 17 (level, low) -> IRQ 18
sata_sis: Detected SiS 182 chipset
ata1: SATA max UDMA/133 cmd 0x1CB0 ctl 0x1CA6 bmdma 0x1C90 irq 18
ata2: SATA max UDMA/133 cmd 0x1CA8 ctl 0x1CA2 bmdma 0x1C98 irq 18
ata1: dev 0 ATA, max UDMA/133, 156301488 sectors: lba48
ata1: dev 0 configured for UDMA/133
scsi0 : sata_sis
ata2: dev 0 ATA, max UDMA/133, 156301488 sectors: lba48
ata2: dev 0 configured for UDMA/133
scsi1 : sata_sis
Vendor: ATA Model: ST380817AS Rev: 3.42
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: ST380817AS Rev: 3.42
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda4 < sda5 sda6 sda7 >
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB)
SCSI device sdb: drive cache: write back
SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB)
SCSI device sdb: drive cache: write back
sdb: sdb1 sdb2 sdb4 < sdb5 sdb6 sdb7 >
Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
mice: PS/2 mouse device common for all mice
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: faulty personality registered as nr 10
md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 3.39
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.4)
powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x6 (1400 mV)
powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x8 (1350 mV)
powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV)
cpu_init done, current fid 0xc, vid 0x6
md: Autodetecting RAID arrays.
md: autorun ...
md: considering sdb7 ...
md: adding sdb7 ...
md: sdb6 has different UUID to sdb7
md: sdb5 has different UUID to sdb7
md: sdb1 has different UUID to sdb7
md: adding sda7 ...
md: sda6 has different UUID to sdb7
md: sda5 has different UUID to sdb7
md: sda1 has different UUID to sdb7
md: created md7
md: bind<sda7>
md: bind<sdb7>
md: running: <sdb7><sda7>
md: kicking non-fresh sda7 from array!
md: unbind<sda7>
md: export_rdev(sda7)
raid1: raid set md7 active with 1 out of 2 mirrors
md: considering sdb6 ...
md: adding sdb6 ...
md: sdb5 has different UUID to sdb6
md: sdb1 has different UUID to sdb6
md: adding sda6 ...
md: sda5 has different UUID to sdb6
md: sda1 has different UUID to sdb6
md: created md6
md: bind<sda6>
md: bind<sdb6>
md: running: <sdb6><sda6>
md: kicking non-fresh sdb6 from array!
md: unbind<sdb6>
md: export_rdev(sdb6)
raid1: raid set md6 active with 1 out of 2 mirrors
md: considering sdb5 ...
md: adding sdb5 ...
md: sdb1 has different UUID to sdb5
md: adding sda5 ...
md: sda1 has different UUID to sdb5
md: created md5
md: bind<sda5>
md: bind<sdb5>
md: running: <sdb5><sda5>
raid1: raid set md5 active with 2 out of 2 mirrors
md: considering sdb1 ...
md: adding sdb1 ...
md: adding sda1 ...
md: created md1
md: bind<sda1>
md: bind<sdb1>
md: running: <sdb1><sda1>
md: kicking non-fresh sda1 from array!
md: unbind<sda1>
md: export_rdev(sda1)
raid1: raid set md1 active with 1 out of 2 mirrors
md: ... autorun DONE.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 288k freed
INIT: version 2.85 booting
System Boot Control: Running /etc/init.d/boot
Mounting /proc filesystem done
Mounting sysfs on /sys done
Mounting /dev/pts done
md: Autodetecting RAID arrays.
Mounting shared memory FS on /dev/shm md: autorun ...
md: considering sda1 ...
md: adding sda1 ...
md: sdb6 has different UUID to sda1
md: sda7 has different UUID to sda1
md: md1 already running, cannot run sda1
md: export_rdev(sda1)
md: considering sdb6 ...
md: adding sdb6 ...
md: sda7 has different UUID to sdb6
md: md6 already running, cannot run sdb6
md: export_rdev(sdb6)
md: considering sda7 ...
md: adding sda7 ...
md: md7 already running, cannot run sda7
md: export_rdev(sda7)
md: ... autorun DONE.
Activating swap-devices in /etc/fstab...
Adding 1959920k swap on /dev/sda2. Priority:-1 extents:1 across:1959920k
Adding 1959920k swap on /dev/sdb2. Priority:-2 extents:1 across:19599done
showconsole: Warning: the ioctl TIOCGDEV is not known by the kernel
Checking root file system...
fsck 1.36 (05-Feb-2005)
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/md1
/ (/dev/md1): clean, 20255/126592 files, 41322/126480 blocks EXT3 Fdoneinternal journal
Activating device mapper...
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: [email protected]
Creating /dev/mapper/control character device with major:10 minor:63.
done
showconsole: Warning: the ioctl TIOCGDEV is not known by the kernel
Checking file systems...
fsck 1.36 (05-Feb-2005)
Checking all file systems.
[/sbin/fsck.xfs (1) -- /usr] fsck.xfs -a /dev/md5
[/sbin/fsck.xfs (1) -- /var] fsck.xfs -a /dev/md6
[/sbin/fsck.xfs (1) -- /home] fsck.xfs -a /dev/md7 done
Setting up kernel module dependencies (if required) done
Mounting local file systems...
proc on /proc type pXFS mounting filesystem md5
roc (rw)
sysfs on /sys type sysfs (rw)
tmpfs on /dev/shm type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/md5 on /usrXFS mounting filesystem md6
type xfs (rw)
Starting XFS recovery on filesystem: md6 (dev: md6)
Ending XFS recovery on filesystem: md6 (dev: md6)
XFS quotacheck md6: Please wait.
xfs_inotobp: xfs_imap() returned an error 22 on md6. Returning error.
xfs_iunlink_remove: xfs_inotobp() returned an error 22 on md6. Returning error.
xfs_inactive: xfs_ifree() returned an error = 22 on md6
xfs_force_shutdown(md6,0x1) called from line 1795 of file fs/xfs/xfs_vnodeops.c. Return address = 0xffffffff8024b668
Filesystem "md6": I/O Error Detected. Shutting down filesystem: md6
Please umount the filesystem, and rectify the problem(s)
XFS quotacheck md6: Done.
Filesystem "md6": XFS mount_quotas: Superblock update failed!
/dev/md6 on /var type xfs (rw,usrquota)
XFS mounting filesystem md7
/dev/md7 on /home type xfs (rw,usrquota)
none on /tmp type tmpfs (rw) done
rm: cannot remove `/var/lib/rpm/__db*': Input/output error
find: /var/run: Input/output error
find: /var/lock: Input/output error
/etc/init.d/boot.cleanup: line 47: /var/run/utmp: Input/output error
Starting udevd cat: /sys/kernel/hotplug_seqnum: No such file or directory
/etc/init.d/boot.udev: line 83: /proc/sys/kernel/hotplug: No such file or directory
failed
Setting up the CMOS clock done
Creating /var/log/boot.msg
Can't open or create /var/run/klogd.pid. failed
showconsole: Warning: the ioctl TIOCGDEV is not known by the kernel
killproc: Can not stat /var/run/blogd.pid: Input/output error
Coldplug
Coldplug: cleaning /events processing eventsumount: /lib/klibc/events: not mounted
done
rm: cannot remove `/var/yp/binding/*.[12]': Input/output error
Setting up hostname 'p15200617' done
Setting up loopback interface lo
lo IP address: 127.0.0.1/8
done
/bin/ls: /var/lib/pam_devperm: Input/output error
Restore device permissions done
Loading required kernel modules done
Disk /dev/md7 doesn't contain a valid partition table
Disk /dev/md6 doesn't contain a valid partition table
Disk /dev/md5 doesn't contain a valid partition table
Disk /dev/md1 doesn't contain a valid partition table
Activating remaining swap-devices in /etc/fstab... done
Setting current sysctl status from /etc/sysctl.conf
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.conf.all.rp_filter = 1
done
Enabling syn flood protection done
Disabling IP forwarding done
done
System Boot Control: The system has been set up
Failed features: boot.cleanup boot.udev
System Boot Control: Running /etc/init.d/boot.local done
killproc: Can not stat /var/run/blogd.pid: Input/output error
INIT: Entering runlevel: 3
rm: cannot remove `/var/run/do_confirm': Input/output error
blogd: Can not write to /var/log/boot.msg: Input/output error
Boot logging started on /dev/ttyS0(/dev/console) at Thu Jul 15 13:55:44 2010
Master Resource Control: previous runlevel: N, switching to runlevel: 3
Starting resource managerstartproc: Can not stat /var/run/resmgrd.pid: Input/output error
unable to create /var/run/resmgr.pid
startproc: exit status of parent of /sbin/resmgrd: 1
failed
Initializing random number generator/etc/init.d/random: line 40: /var/lib/misc/random-seed: Input/output error
chmod: cannot access `/var/lib/misc/random-seed': Input/output error
failed
rm: cannot remove `/var/run/sysconfig/if-*': Input/output error
rm: cannot remove `/var/run/sysconfig/ifup-*': Input/output error
rm: cannot lstat `/var/run/sysconfig/tmp': Input/output error
mkdir: cannot create directory `/var/run': Input/output error
/etc/init.d/network: line 99: /var/run/sysconfig/network: Input/output error
Setting up network interfaces:
Service network not started and mode 'auto' -> skipping done
Service network not started and mode 'auto' -> skipping done
cat: /var/run/sysconfig/network: Input/output error
/etc/init.d/network: line 386: 1279194945 - : syntax error: operand expected (error token is " ")
Importing Net File System (NFS) unused
Starting nfsboot (sm-notify) /var/lib/nfs/sm: Input/output error
/var/lib/nfs/sm.bak: Input/output error
done
startproc: startproc: Can not stat /var/run/xinetd.pid: Input/output error
Starting syslog servicesstartproc: Can not stat /var/run/syslog-ng.pid: Input/output error
io.c: bind_unix_socket(): bind failed /var/lib/named/dev/log (Input/output error)
Error initializing configuration, exiting.
startproc: exit status of parent of /sbin/syslog-ng: 1
failed
Starting SSH daemon done
Starting CRON daemonstartproc: Can not stat /var/run/cron.pid: Input/output error
/usr/sbin/cron: can't open or create /var/run/cron.pid: Input/output error
startproc: exit status of parent of /usr/sbin/cron: 1
failed
Starting Courier-IMAP server:
Starting imapdrm: cannot remove `/var/run/couriersslcache': Input/output error
/var/run/imapd.pid.lock: Input/output error
ll_daemon_start: Resource temporarily unavailable
done
Starting imap-sslrm: cannot remove `/var/run/couriersslcache': Input/output error
/var/run/imapd-ssl.pid.lock: Input/output error
ll_daemon_start: Resource temporarily unavailable
done
Starting pop3/var/run/pop3d.pid.lock: Input/output error
ll_daemon_start: Resource temporarily unavailable
done
Starting pop3-ssl/var/run/pop3d-ssl.pid.lock: Input/output error
ll_daemon_start: Resource temporarily unavailable
done
Missing privilege separation directory: /var/lib/empty
nscd: 564 /var/run/nscd/nscd.pid: Input/output error
nscd: 564 cannot create /var/run/nscd/passwd; no persistent database used
nscd: 564 cannot create /var/run/nscd/group; no persistent database used
nscd: 564 cannot create /var/run/nscd/hosts; no sharing possible
nscd: 564 /var/run/nscd/socket: Input/output error
Starting Name Service Cache Daemonstartproc: Can not stat /var/run/nscd.pid: Input/output error
failed
checkproc: checkproc: Can not stat /var/run/cpufreqd.pid: Input/output error
Loading keymap qwertz/de-latin1-nodeadkeys.map.gz failed
rm: cannot remove `/var/run/numlock-on': Input/output error
Loading compose table winkeys shiftctrl latin1.add done
Start Unicode mode done
Loading console font lat9w-16.psfu -m trivial G0:loadable done
checkproc: checkproc: Can not stat /var/lib/named/var/run/named/named.pid: Input/output error
Starting hardware scan on bootrm: cannot remove `/var/lib/hardware/LOCK': Input/output error
modprobe: FATAL: Module ac not found.
modprobe: FATAL: Module battery not found.
modprobe: FATAL: Module button not found.
modprobe: FATAL: Module processor not found.
checkproc: checkAttached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
proc: Can not stAttached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 0
at /var/run/mysqld.pid: Input/output error
checkproc: Can not stat /var/run/powersaved.pid: Input/output error
loading ACPI modules (fan thermal ) done
Starting powersaved (directly accessing /proc/acpi/events) startproc: Can not stat /var/run/powersaved.pid: Input/output error
done
Error writing configuration for qLht.W5KqAxlz5h1 (Fujitsu Siemens Host bridge)
done
/var/qmail/bin/qmail-send is not a valid binary skipped
Starting SWsoft control panels server...startproc: Can not stat /var/run/sw-cp-server.pid: Input/output error
done
Starting INET services. (xinetd)startproc: Can not stat /var/run/xinetd.pid: Input/output error
failed
Starting 3ware DiskSwitch daemon: startproc: Can not stat /var/run/3dm2.pid: Input/output error
done
2010-07-15 13:55:47: (log.c.62) opening errorlog '/var/log/sw-cp-server/error_log' failed: Input/output error
2010-07-15 13:55:47: (server.c.582) opening errorlog failed, dying
Starting mailman (Warning: the Apache2 webinterface for Mailman has not been activated!)Logging error: <StampedLogger to '/var/lib/mailman/logs/error'>
Traceback (most recent call last):
File "/usr/lib/mailman/Mailman/Logging/Logger.py", line 67, in __get_f
1)
File "/usr/lib64/python2.4/codecs.py", line 586, in open
file = __builtin__.open(filename, mode, buffering)
IOError: [Errno 5] Input/output error: '/var/lib/mailman/logs/error'
Original log message:
[Errno 5] Input/output error: '/var/lib/mailman/logs/error'
Jul 15 13:55:47 2010 (556) IOError reading list extension: [Errno 5] Input/output error: '/var/lib/mailman/lists/mailman/extend.py'
Site list is missing: mailman
Jul 15 13:55:47 2010 (556) Site list is missing: mailman
Exception exceptions.OSError: <exceptions.OSError instance at 0x2aaaacc07b48> in ignored
failed
mkdir: cannot create directory `/var/lock': Input/output error
Starting xinetd service... failed
Starting named service... failed
Starting mysql service... failed
Starting postgresql service... not installed
Starting psa-spamassassin service... done
Plesk: Starting Mail Server... /var/qmail/bin/qmail-send is not a valid binary
/var/qmail/bin/qmail-send is not a valid binary
failed
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (5)
websrvmng: Unable to connect to Plesk Database: Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (5)
System error 5: Input/output error
websrvmng: Unable to connect to Plesk Database: Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (5)
System error 5: Input/output error
websrvmng: Unable to connect to the mysql database
System error 5: Input/output error
websrvmng: Unable to connect to the mysql database
System error 5: Input/output error
Starting mail handlers tmpfs storage
/usr/lib64/plesk-9.0/handlers-tmpfs: line 49: command: restorecon: not found
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (5)
Starting Plesk... startproc: startproc: Can not stat /var/run/sw-cp-server.pid: Input/output error
startproc: startproc: exit status of parent of /usr/sbin/sw-cp-serverd: 255
failed
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (5)
mkdir: cannot create directory `/var/run': Input/output error
chown: cannot access `/var/run/spamd': Input/output error
chmod: cannot access `/var/run/spamd': Input/output error
Unable to connect to Plesk Database: Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (5)
System error 5: Input/output error
Unable to connect to mysql database
System error 25: Inappropriate ioctl for device
Starting psa-spamassassin service: failed
Master Resource Control: runlevel 3 has been reached
Failed services in runlevel 3: random resmgr kbd syslog cron mailman nscd xinetd
Skipped services in runlevel 3: nfs qmail
killproc: Can not stat /var/run/blogd.pid: Input/output error
Welcome to SuSE Linux 9.3 (x86-64) - Kernel 2.6.14.3-051207a (ttyS0).
p15200617 login: root
Password:
Have a lot of fun...
parted liefert
parted /dev/sda print
program parted is using a deprecated SCSI ioctl, please convert it to SG_IO
Disk geometry for /dev/sda: 0.000-76319.085 megabytes
Disk label type: msdos
Minor Start End Type Filesystem Flags
1 0.031 494.187 primary ext3 raid, type=fd
2 494.187 2408.181 primary linux-swap type=82
4 2408.181 76316.594 extended type=05
5 2408.212 7185.322 logical xfs raid, type=fd
6 7185.353 11962.463 logical xfs raid, type=fd
7 11962.494 76316.594 logical xfs raid, type=fd
Information: Don't forget to update /etc/fstab, if necessary.
parted /dev/sdb print
program parted is using a deprecated SCSI ioctl, please convert it to SG_IO
Disk geometry for /dev/sdb: 0.000-76319.085 megabytes
Disk label type: msdos
Minor Start End Type Filesystem Flags
1 0.031 494.187 primary ext3 raid, type=fd
2 494.187 2408.181 primary linux-swap type=82
4 2408.181 76316.594 extended type=05
5 2408.212 7185.322 logical xfs raid, type=fd
6 7185.353 11962.463 logical xfs raid, type=fd
7 11962.494 76316.594 logical xfs raid, type=fd
Information: Don't forget to update /etc/fstab, if necessary.
Wie komme ich hier weiter?
MfG
Bernd
