1&1 Root Server Bootproblem

H

Hofmeyer

New Member
Hi,

ich hab ein paar Probleme mit einem 1&1 Root Server 3XL64.

Es wurden anscheinend einige Online Updates mit YAST durchgeführt, und somit wurde wohl auch der Kernel aktualisiert, wodurch jetzt wohl die Festplatten nicht mehr erkannt werden.

Ich würde gerne die Daten sichern, bzw. das ganze versuchen zu korrigieren, hänge bloß grade an einer Stelle und weiß nicht so richtig, wie ich weiter vorgehen soll - unter Umständen ist das ganze sehr banal und ich habe hier auch schon ein paar Threads mit dem gleichen Thema gelesen - aber vielleicht könnte mir jemand hier auf die Sprünge helfen.

Ich hab leider mit Servern seit dem Studium nicht mehr in dieser Tiefe gearbeitet und bin jetzt eingesprungen, um den Server wieder in den Gang zu bekommen.

Code: 
LILO 22.7 boot: 
Loading Linux........................................................................................
BIOS data check successful
Bootdata ok (command line is auto BOOT_IMAGE=Linux ro root=801 console=tty0 console=ttyS0,57600 panic=30)
Linux version 2.6.18.8-0.9-default (geeko@buildhost) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP Sun Feb 10 22:48:05 UTC 2008
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
 BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000ddf10000 (usable)
 BIOS-e820: 00000000ddf10000 - 00000000ddf16000 (ACPI data)
 BIOS-e820: 00000000ddf16000 - 00000000ddf80000 (ACPI NVS)
 BIOS-e820: 00000000ddf80000 - 00000000e0000000 (reserved)
 BIOS-e820: 00000000fc000000 - 00000000fe000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
DMI present.
Scanning NUMA topology in Northbridge 24
Number of nodes 1
Node 0 MemBase 0000000000000000 Limit 0000000120000000
Using node hash shift of 63
Bootmem setup node 0 0000000000000000-0000000120000000
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x1008
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:3 APIC version 16
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:3 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
Setting APIC routing to physical flat
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at e2000000 (gap: e0000000:1c000000)
SMP: Allowing 2 CPUs, 0 hotplug CPUs
Built 1 zonelists.  Total pages: 1022136
Kernel command line: auto BOOT_IMAGE=Linux ro root=801 console=tty0 console=ttyS0,57600 panic=30
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Disabling vsyscall due to use of PM timer
time.c: Using 3.579545 MHz WALL PM GTOD PM timer.
time.c: Detected 2611.956 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
CPU 0: aperture @ ebb0000000 size 32 MB
Aperture too small (32 MB)
No AGP bridge found
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 4000000
Memory: 4016552k/4718592k available (1916k kernel code, 143632k reserved, 1281k data, 188k init)
Calibrating delay using timer specific routine.. 5229.41 BogoMIPS (lpj=10458836)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
checking if image is initramfs... it is
Freeing initrd memory: 2917k freed
ACPI: Core revision 20060707
Using local APIC timer interrupts.
result 12557474
Detected 12.557 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 5224.17 BogoMIPS (lpj=10448342)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Dual-Core AMD Opteron(tm) Processor 1218 HE stepping 03
CPU 1: Syncing TSC to CPU 0.
CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 615 cycles)
Brought up 2 CPUs
testing NMI watchdog ... OK.
migration_cost=503
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at fc000000
PCI: No mmconfig possible on device 0:18
PCI: No mmconfig possible on device 5:e
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:10.0
ACPI: Device [TPM] status [00000008]: functional but not present; setting present
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 16 17 18 19 20 21 22 23) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LNKI] (IRQs 16 17 18 19 20 21 22 23) *7
ACPI: PCI Interrupt Link [LNKJ] (IRQs 16 17 18 19 20 21 22 23) *11
ACPI: PCI Interrupt Link [LNKK] (IRQs 16 17 18 19 20 21 22 23) *10
ACPI: PCI Interrupt Link [LNKL] (IRQs 16 17 18 19 20 21 22 23) *10
ACPI: PCI Interrupt Link [LNKM] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LNKN] (IRQs 16 17 18 19 20 21 22 23) *5
ACPI: PCI Interrupt Link [LNKO] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LNKP] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: Device [FDC] status [00000008]: functional but not present; setting present
ACPI: Device [LPT] status [00000008]: functional but not present; setting present
ACPI: Device [ECP] status [00000008]: functional but not present; setting present
ACPI: Device [COM2] status [00000008]: functional but not present; setting present
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
PCI: Bridge: 0000:00:02.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:03.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:04:07.0
  IO window: disabled.
  MEM window: f0400000-f04fffff
  PREFETCH window: f0000000-f03fffff
PCI: Bridge: 0000:00:10.0
  IO window: disabled.
  MEM window: f0400000-f04fffff
  PREFETCH window: f0000000-f03fffff
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
Simple Boot Flag at 0x36 set to 0x80
audit: initializing netlink socket (disabled)
audit(1216480661.960:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcie_portdrv_probe->Dev[02fc:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
pcie_portdrv_probe->Dev[02fd:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Real Time Clock Driver v1.12ac
hpet_acpi_add: no address or irqs in _CRS
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 1
ACPI: (supports S0 S1 S3 S4 S5)
Freeing unused kernel memory: 188k freed
Boot logging started on /dev/ttyS0(/dev/console) at Sat Jul 19 15:17:42 2008
Creating device nodes with udev
Loading ide-core
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Loading ide-disk
Loading scsi_mod
SCSI subsystem initialized
Loading sd_mod
Loading processor
Loading thermal
Loading libata
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Loading sata_sis
Loading sis5513
Loading fan
Loading edd
Loading jbd
Loading mbcache
Loading ext3
Waiting for device /dev/root to appear: ..............................not found -- exiting to /bin/sh

Nach einem Rescue System Boot habe ich versucht ein paar Devices zu mounten, aber dabei kam leider immer diese Fehlermeldung.

Code: 
fdisk -ls

Disk /dev/sda: 400.0 GB, 400088104960 bytes
255 heads, 63 sectors/track, 48641 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1         123      987966   83  Linux
/dev/sda2             124         367     1959930   82  Linux swap / Solaris
/dev/sda4             368       48641   387760905    5  Extended
/dev/sda5             368         976     4891761   83  Linux
/dev/sda6             977        1585     4891761   83  Linux
/dev/sda7            1586        4018    19543041   83  Linux
/dev/sda8            4019       48641   358434216   83  Linux

Code: 
mount /dev/md1 /mnt
EXT4-fs: unable to read superblock
mount: you must specify the filesystem type

Über Tips wäre ich sehr dankbar.

Viele Grüße
Tim
 
`mount /dev/sda1 /mnt` (/dev/mdX ist nur bei Software-RAIDs vorhanden), dann den alten Kernel in /mnt/boot wiederherstellen (i. d. R. Symlink vmlinuz umbiegen) und dann LILO neu schreiben (am einfachsten mit `chroot /mnt` und dann `lilo`).
 
You must log in or register to reply here.
Back
Top