Keine Verbindung möglich von Client nach Postfix

#1
Hallo Freunde,

habe folgendes Problem Nutze VHCS2 mit Debian Etch

habe den server auf PHP5 und MySQL 5 aufgerüstet, seit dem kann ich mich nicht mehr einloggen via Mail Client

in den Logs kommt nur : courierpop3login: LOGIN FAILED

aber nirgends das was falsch ist oder sonst was

ich vermuhte das der fehler irgend wo in einer Config datei ist von SQL oder sonst wo den ich bin jetzt mit meinem Wissen am ende....

Könnt ihr mir da Helfen?
 
#2
ok Problem gelöst ( müsste noch angepasst werden )

also Original /etc/courier/authdaemonrc
Code:
##VERSION: $Id: authdaemonrc.in,v 1.13 2005/10/05 00:07:32 mrsam Exp $
#
# Copyright 2000-2005 Double Precision, Inc. See COPYING for
# distribution information.
#
# authdaemonrc created from authdaemonrc.dist by sysconftool
#
# Do not alter lines that begin with ##, they are used when upgrading
# this configuration.
#
# This file configures authdaemond, the resident authentication daemon.
#
# Comments in this file are ignored. Although this file is intended to
# be sourced as a shell script, authdaemond parses it manually, so
# the acceptable syntax is a bit limited. Multiline variable contents,
# with the \ continuation character, are not allowed. Everything must
# fit on one line. Do not use any additional whitespace for indentation,
# or anything else.
##NAME: authmodulelist:2
#
# The authentication modules that are linked into authdaemond. The
# default list is installed. You may selectively disable modules simply
# by removing them from the following list. The available modules you
# can use are: authuserdb authpam authpgsql authldap authmysql authcustom authvchkpw authpipe
authmodulelist="authpam"
##NAME: authmodulelistorig:3
#
# This setting is used by Courier's webadmin module, and should be left
# alone
authmodulelistorig="authuserdb authpam authpgsql authldap authmysql authcustom authvchkpw authpipe"
##NAME: daemons:0
#
# The number of daemon processes that are started. authdaemon is typically
# installed where authentication modules are relatively expensive: such
# as authldap, or authmysql, so it's better to have a number of them running.
# PLEASE NOTE: Some platforms may experience a problem if there's more than
# one daemon. Specifically, SystemV derived platforms that use TLI with
# socket emulation. I'm suspicious of TLI's ability to handle multiple
# processes accepting connections on the same filesystem domain socket.
#
# You may need to increase daemons if as your system load increases. Symptoms
# include sporadic authentication failures. If you start getting
# authentication failures, increase daemons. However, the default of 5
# SHOULD be sufficient. Bumping up daemon count is only a short-term
# solution. The permanent solution is to add more resources: RAM, faster
# disks, faster CPUs...
daemons=5
##NAME: authdaemonvar:2
#
# authdaemonvar is here, but is not used directly by authdaemond. It's
# used by various configuration and build scripts, so don't touch it!
authdaemonvar=/var/run/courier/authdaemon
##NAME: DEBUG_LOGIN:0
#
# Dump additional diagnostics to syslog
#
# DEBUG_LOGIN=0 - turn off debugging
# DEBUG_LOGIN=1 - turn on debugging
# DEBUG_LOGIN=2 - turn on debugging + log passwords too
#
# ** YES ** - DEBUG_LOGIN=2 places passwords into syslog.
#
# Note that most information is sent to syslog at level 'debug', so
# you may need to modify your /etc/syslog.conf to be able to see it.
DEBUG_LOGIN=0
##NAME: DEFAULTOPTIONS:0
#
# A comma-separated list of option=value pairs. Each option is applied
# to an account if the account does not have its own specific value for
# that option. So for example, you can set
# DEFAULTOPTIONS="disablewebmail=1,disableimap=1"
# and then enable webmail and/or imap on individual accounts by setting
# disablewebmail=0 and/or disableimap=0 on the account.
DEFAULTOPTIONS=""
##NAME: LOGGEROPTS:0
#
# courierlogger(1) options, e.g. to set syslog facility
#
LOGGEROPTS=""
##NAME: LDAP_TLS_OPTIONS:0
#
# Options documented in ldap.conf(5) can be set here, prefixed with 'LDAP'.
# Examples:
#
#LDAPTLS_CACERT=/path/to/cacert.pem
#LDAPTLS_REQCERT=demand
#LDAPTLS_CERT=/path/to/clientcert.pem
#LDAPTLS_KEY=/path/to/clientkey.pem
habe angepasst nach

Code:
##VERSION: $Id: authdaemonrc.in,v 1.13 2005/10/05 00:07:32 mrsam Exp $
#
# Copyright 2000-2005 Double Precision, Inc. See COPYING for
# distribution information.
#
# authdaemonrc created from authdaemonrc.dist by sysconftool
#
# Do not alter lines that begin with ##, they are used when upgrading
# this configuration.
#
# This file configures authdaemond, the resident authentication daemon.
#
# Comments in this file are ignored. Although this file is intended to
# be sourced as a shell script, authdaemond parses it manually, so
# the acceptable syntax is a bit limited. Multiline variable contents,
# with the \ continuation character, are not allowed. Everything must
# fit on one line. Do not use any additional whitespace for indentation,
# or anything else.
##NAME: authmodulelist:0
#
# The authentication modules that are linked into authdaemond. The
# default list is installed. You may selectively disable modules simply
# by removing them from the following list. The available modules you
# can use are: authuserdb authpam authpgsql authldap authmysql authcustom authvchkpw authpipe
authmodulelist="authuserdb"
##NAME: authmodulelistorig:1
#
# This setting is used by Courier's webadmin module, and should be left
# alone
authmodulelistorig="authcustom authcram authuserdb authldap authpgsql authmysql authpam"
##NAME: daemons:0
#
# The number of daemon processes that are started. authdaemon is typically
# installed where authentication modules are relatively expensive: such
# as authldap, or authmysql, so it's better to have a number of them running.
# PLEASE NOTE: Some platforms may experience a problem if there's more than
# one daemon. Specifically, SystemV derived platforms that use TLI with
# socket emulation. I'm suspicious of TLI's ability to handle multiple
# processes accepting connections on the same filesystem domain socket.
#
# You may need to increase daemons if as your system load increases. Symptoms
# include sporadic authentication failures. If you start getting
# authentication failures, increase daemons. However, the default of 5
# SHOULD be sufficient. Bumping up daemon count is only a short-term
# solution. The permanent solution is to add more resources: RAM, faster
# disks, faster CPUs...
daemons=5
##NAME: authdaemonvar:2
#
# authdaemonvar is here, but is not used directly by authdaemond. It's
# used by various configuration and build scripts, so don't touch it!
authdaemonvar=/var/run/courier/authdaemon
##NAME: DEBUG_LOGIN:0
#
# Dump additional diagnostics to syslog
#
# DEBUG_LOGIN=0 - turn off debugging
# DEBUG_LOGIN=1 - turn on debugging
# DEBUG_LOGIN=2 - turn on debugging + log passwords too
#
# ** YES ** - DEBUG_LOGIN=2 places passwords into syslog.
#
# Note that most information is sent to syslog at level 'debug', so
# you may need to modify your /etc/syslog.conf to be able to see it.
DEBUG_LOGIN=0
##NAME: DEFAULTOPTIONS:0
#
# A comma-separated list of option=value pairs. Each option is applied
# to an account if the account does not have its own specific value for
# that option. So for example, you can set
# DEFAULTOPTIONS="disablewebmail=1,disableimap=1"
# and then enable webmail and/or imap on individual accounts by setting
# disablewebmail=0 and/or disableimap=0 on the account.
DEFAULTOPTIONS=""
##NAME: LOGGEROPTS:0
#
# courierlogger(1) options, e.g. to set syslog facility
#
LOGGEROPTS=""
##NAME: LDAP_TLS_OPTIONS:0
#
# Options documented in ldap.conf(5) can be set here, prefixed with 'LDAP'.
# Examples:
#
#LDAPTLS_CACERT=/path/to/cacert.pem
#LDAPTLS_REQCERT=demand
#LDAPTLS_CERT=/path/to/clientcert.pem
#LDAPTLS_KEY=/path/to/clientkey.pem
##NAME: version:0
#
# When you have multiple versions of authdaemond.* installed, authdaemond
# just picks the first one it finds. Set "version" to override that.
# For example: version=authdaemond.plain
version=""
Jetzt läuft er so hoffe das es richtig ist
 

yavhcsu

Registered User
#3
Also, ich frage mich, ob das "Original" jemals mit VHCS gelaufen sein dürfte. Hier wird als authmodulelist "authuserpam" und nicht wie es sein sollte "authuserdb" angegeben.

Das hat mit dem PHP5 / MYSQL5 Upgrade IMHO nichts zu tun.

Es könnte vielmehr ein apt-get update / apt-get upgrade u.a. auch von Courier gelaufen sein, wo man bei der Frage, ob die "Standard"-Konfigurationsdateien für die neue Version verwendet werden sollen, mit Ja geantwortet hat.

Die Kopie sieh mir eher schon aus, wie das ordinäre Backup der Konfigurationsdatei von einem Server mit Debian und VHCS.

Ich hoffe sehr, dass Du nicht noch mehr derartige Fragen so beantwortet hast, sonst könnte auch z.B. proftpd nicht merh laufen. :eek:

Mach doch bitte beim nächsten Post der Config die Kommentare raus, so lässt sich einacher überblicken, was geändert wurde.
 
Top