Festplatte kurz vor Aufall?

lyn2k9

Member
Hallo ihr lieben,
es gibt sehr viele Threads zum Thema Festplattenausfall. Ich habe mir auch schon den Wikipediaeintrag von smart tools durchgelesen, wollte aber trotzdem nochmal nachfragen. Diese Platte steht kurz vor dem Ausfall oder?

Code:
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.2.0-42-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Toshiba 3.5" HDD DT01ACA...
Device Model:     TOSHIBA DT01ACA300
Serial Number:    
LU WWN Device Id: 5 000039 fe3c1dc7f
Firmware Version: MX6OABB0
User Capacity:    3,000,592,982,016 bytes [3.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Jan 24 18:49:54 2018 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x85)	Offline data collection activity
					was aborted by an interrupting command from host.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      ( 249)	Self-test routine in progress...
					90% of test remaining.
Total time to complete Offline 
data collection: 		(21791) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 364) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   139   139   054    Pre-fail  Offline      -       72
  3 Spin_Up_Time            0x0007   100   100   024    Pre-fail  Always       -       345
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       7
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   124   124   020    Pre-fail  Offline      -       33
  9 Power_On_Hours          0x0012   098   098   000    Old_age   Always       -       17863
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       7
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       15
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       15
194 Temperature_Celsius     0x0002   130   130   000    Old_age   Always       -       46 (Min/Max 25/50)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Interrupted (host reset)      90%     15793         -
# 2  Extended offline    Completed without error       00%      1736         -
# 3  Extended offline    Completed without error       00%       661         -
# 4  Extended offline    Completed without error       00%       242         -
# 5  Extended offline    Completed without error       00%       232         -
# 6  Extended offline    Completed without error       00%        51         -
# 7  Extended offline    Completed without error       00%        32         -
# 8  Extended offline    Completed without error       00%        26         -
# 9  Extended offline    Completed without error       00%        19         -
#10  Extended offline    Completed without error       00%        12         -
#11  Extended offline    Completed without error       00%         5         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
 
Woran meinst Du das zu erkennen?

Ich habe die Ausgabe jetzt nur überflogen und kenne auch die SMART-Eigenheiten von Toshiba nicht, aber ich würde sagen die schnurrt wie ein Kätzchen.

Genaueres wird man erst sagen können, wenn der (Extended) Selftest durch ist, der offenbar aktuell läuft?
 

PHP-Friends

Blog Benutzer
verifizierter Anbieter
Ich kann auch kein Problem erkennen, wenngleich die Kühlung etwas verbessert werden sollte. 46 Grad (bzw. 50 im Peak) sind schon recht viel. Ansonsten sind gut zwei Jahre Betriebsdauer auch bei einer Desktop-Festplatte normalerweise noch kein Problem.
 
A

andreas0

Guest
Diese Platte steht kurz vor dem Ausfall oder?
Würde ich aufgrund der SMART-Werte auch so sehen.

Zu mindestens solltest du jetzt schon mal für Ersatz sorgen, da sie zu jeder Zeit laut SMART-Werte ausfallen könnte.
 

Joe User

Zentrum der Macht
Sowohl Deine SMARTMonTools als auch Deine drivedb sind extrem veraltet, weshalb der Ausgabe an sch schon nicht zu trauen ist (Hint: die Festplatte ist neuer als die drivedb).
Unabhängig davon ist die Platte laut obiger Ausgabe noch völlig in Ordnung.
 

Joe User

Zentrum der Macht
Das hier sind Platten welche im Laufe der nächsten ein bis zwei Jahre mal ausgetauscht werden sollten, aber eilig ist das auf keinen Fall.
Code:
[[email protected]:~] # smartctl -x -q noserial /dev/ada0
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.1-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Constellation ES.2 (SATA 6Gb/s)
Device Model:     ST33000650NS
Firmware Version: 0004
User Capacity:    3,000,592,982,016 bytes [3.00 TB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Thu Jan 25 00:26:13 2018 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Unavailable
Rd look-ahead is: Enabled
Write cache is:   Enabled
DSN feature is:   Unavailable
ATA Security is:  Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (  600) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 456) minutes.
Conveyance self-test routine
recommended polling time:        (   2) minutes.
SCT capabilities:              (0x10bd) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR--   078   063   044    -    76866920
  3 Spin_Up_Time            PO----   092   092   000    -    0
  4 Start_Stop_Count        -O--CK   100   100   020    -    9
  5 Reallocated_Sector_Ct   PO--CK   100   100   036    -    0
  7 Seek_Error_Rate         POSR--   086   060   030    -    452643165
  9 Power_On_Hours          -O--CK   060   060   000    -    35335
 10 Spin_Retry_Count        PO--C-   100   100   097    -    0
 12 Power_Cycle_Count       -O--CK   100   100   020    -    9
184 End-to-End_Error        -O--CK   100   100   099    -    0
187 Reported_Uncorrect      -O--CK   100   100   000    -    0
188 Command_Timeout         -O--CK   100   100   000    -    0
189 High_Fly_Writes         -O-RCK   100   100   000    -    0
190 Airflow_Temperature_Cel -O---K   063   057   045    -    37 (Min/Max 30/41)
191 G-Sense_Error_Rate      -O--CK   100   100   000    -    0
192 Power-Off_Retract_Count -O--CK   100   100   000    -    4
193 Load_Cycle_Count        -O--CK   100   100   000    -    9
194 Temperature_Celsius     -O---K   037   043   000    -    37 (0 23 0 0 0)
195 Hardware_ECC_Recovered  -O-RC-   018   003   000    -    76866920
197 Current_Pending_Sector  -O--C-   100   100   000    -    0
198 Offline_Uncorrectable   ----C-   100   100   000    -    0
199 UDMA_CRC_Error_Count    -OSRCK   200   200   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      5  Comprehensive SMART error log
0x03       GPL     R/O      5  Ext. Comprehensive SMART error log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x08       GPL,SL  R/O      2  Power Conditions log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  NCQ Command Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x21       GPL     R/O      1  Write stream error log
0x22       GPL     R/O      1  Read stream error log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xa1       GPL,SL  VS      20  Device vendor specific log
0xa2       GPL     VS    4496  Device vendor specific log
0xa8       GPL,SL  VS     129  Device vendor specific log
0xa9       GPL,SL  VS       1  Device vendor specific log
0xb0       GPL     VS    5176  Device vendor specific log
0xbd       GPL     VS     252  Device vendor specific log
0xbe-0xbf  GPL     VS   65535  Device vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
No Errors Logged

SMART Extended Self-test Log Version: 1 (1 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     35313         -
# 2  Short offline       Completed without error       00%     35289         -
# 3  Short offline       Completed without error       00%     35265         -
# 4  Short offline       Completed without error       00%     35241         -
# 5  Extended offline    Completed without error       00%     35226         -
# 6  Short offline       Completed without error       00%     35217         -
# 7  Short offline       Completed without error       00%     35193         -
# 8  Short offline       Completed without error       00%     35169         -
# 9  Short offline       Completed without error       00%     35145         -
#10  Short offline       Completed without error       00%     35121         -
#11  Short offline       Completed without error       00%     35097         -
#12  Short offline       Completed without error       00%     35073         -
#13  Extended offline    Completed without error       00%     35058         -
#14  Short offline       Completed without error       00%     35049         -
#15  Short offline       Completed without error       00%     35025         -
#16  Short offline       Completed without error       00%     35001         -
#17  Short offline       Completed without error       00%     34977         -
#18  Short offline       Completed without error       00%     34953         -
#19  Short offline       Completed without error       00%     34929         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       522 (0x020a)
SCT Support Level:                   1
Device State:                        Active (0)
Current Temperature:                    37 Celsius
Power Cycle Min/Max Temperature:     30/41 Celsius
Lifetime    Min/Max Temperature:     23/44 Celsius
Under/Over Temperature Limit Count:   0/65651

SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        10 minutes
Min/Max recommended Temperature:      0/ 0 Celsius
Min/Max Temperature Limit:            0/ 0 Celsius
Temperature History Size (Index):    128 (82)

Index    Estimated Time   Temperature Celsius
  83    2018-01-24 03:10    37  ******************
  84    2018-01-24 03:20    36  *****************
 ...    ..( 33 skipped).    ..  *****************
 118    2018-01-24 09:00    36  *****************
 119    2018-01-24 09:10    37  ******************
 120    2018-01-24 09:20    36  *****************
 ...    ..( 61 skipped).    ..  *****************
  54    2018-01-24 19:40    36  *****************
  55    2018-01-24 19:50    37  ******************
 ...    ..( 19 skipped).    ..  ******************
  75    2018-01-24 23:10    37  ******************
  76    2018-01-24 23:20    38  *******************
  77    2018-01-24 23:30    38  *******************
  78    2018-01-24 23:40    37  ******************
 ...    ..(  3 skipped).    ..  ******************
  82    2018-01-25 00:20    37  ******************

SCT Error Recovery Control:
           Read:    100 (10.0 seconds)
          Write:    100 (10.0 seconds)

Device Statistics (GP/SMART Log 0x04) not supported

Pending Defects log (GP Log 0x0c) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x000a  2          420  Device-to-host register FISes sent due to a COMRESET
0x0001  2            0  Command failed due to ICRC error
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS

[[email protected]:~] # smartctl -x -q noserial /dev/ada1
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.1-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Constellation ES.2 (SATA 6Gb/s)
Device Model:     ST33000650NS
Firmware Version: 0004
User Capacity:    3,000,592,982,016 bytes [3.00 TB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Thu Jan 25 00:27:48 2018 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Unavailable
Rd look-ahead is: Enabled
Write cache is:   Enabled
DSN feature is:   Unavailable
ATA Security is:  Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (  600) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 446) minutes.
Conveyance self-test routine
recommended polling time:        (   2) minutes.
SCT capabilities:              (0x10bd) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR--   082   063   044    -    168205113
  3 Spin_Up_Time            PO----   092   092   000    -    0
  4 Start_Stop_Count        -O--CK   100   100   020    -    10
  5 Reallocated_Sector_Ct   PO--CK   100   100   036    -    0
  7 Seek_Error_Rate         POSR--   086   060   030    -    453912587
  9 Power_On_Hours          -O--CK   060   060   000    -    35337
 10 Spin_Retry_Count        PO--C-   100   100   097    -    0
 12 Power_Cycle_Count       -O--CK   100   100   020    -    10
184 End-to-End_Error        -O--CK   100   100   099    -    0
187 Reported_Uncorrect      -O--CK   100   100   000    -    0
188 Command_Timeout         -O--CK   100   100   000    -    0
189 High_Fly_Writes         -O-RCK   100   100   000    -    0
190 Airflow_Temperature_Cel -O---K   060   055   045    -    40 (Min/Max 30/44)
191 G-Sense_Error_Rate      -O--CK   100   100   000    -    0
192 Power-Off_Retract_Count -O--CK   100   100   000    -    5
193 Load_Cycle_Count        -O--CK   100   100   000    -    10
194 Temperature_Celsius     -O---K   040   045   000    -    40 (0 23 0 0 0)
195 Hardware_ECC_Recovered  -O-RC-   022   005   000    -    168205113
197 Current_Pending_Sector  -O--C-   100   100   000    -    0
198 Offline_Uncorrectable   ----C-   100   100   000    -    0
199 UDMA_CRC_Error_Count    -OSRCK   200   200   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      5  Comprehensive SMART error log
0x03       GPL     R/O      5  Ext. Comprehensive SMART error log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x08       GPL,SL  R/O      2  Power Conditions log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  NCQ Command Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x21       GPL     R/O      1  Write stream error log
0x22       GPL     R/O      1  Read stream error log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xa1       GPL,SL  VS      20  Device vendor specific log
0xa2       GPL     VS    4496  Device vendor specific log
0xa8       GPL,SL  VS     129  Device vendor specific log
0xa9       GPL,SL  VS       1  Device vendor specific log
0xb0       GPL     VS    5176  Device vendor specific log
0xbd       GPL     VS     252  Device vendor specific log
0xbe-0xbf  GPL     VS   65535  Device vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
No Errors Logged

SMART Extended Self-test Log Version: 1 (1 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     35315         -
# 2  Short offline       Completed without error       00%     35291         -
# 3  Short offline       Completed without error       00%     35267         -
# 4  Short offline       Completed without error       00%     35243         -
# 5  Extended offline    Completed without error       00%     35228         -
# 6  Short offline       Completed without error       00%     35219         -
# 7  Short offline       Completed without error       00%     35195         -
# 8  Short offline       Completed without error       00%     35171         -
# 9  Short offline       Completed without error       00%     35147         -
#10  Short offline       Completed without error       00%     35123         -
#11  Short offline       Completed without error       00%     35099         -
#12  Short offline       Completed without error       00%     35075         -
#13  Extended offline    Completed without error       00%     35059         -
#14  Short offline       Completed without error       00%     35051         -
#15  Short offline       Completed without error       00%     35027         -
#16  Short offline       Completed without error       00%     35003         -
#17  Short offline       Completed without error       00%     34979         -
#18  Short offline       Completed without error       00%     34955         -
#19  Short offline       Completed without error       00%     34931         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       522 (0x020a)
SCT Support Level:                   1
Device State:                        Active (0)
Current Temperature:                    40 Celsius
Power Cycle Min/Max Temperature:     30/44 Celsius
Lifetime    Min/Max Temperature:     23/45 Celsius
Under/Over Temperature Limit Count:   0/65659

SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        10 minutes
Min/Max recommended Temperature:      0/ 0 Celsius
Min/Max Temperature Limit:            0/ 0 Celsius
Temperature History Size (Index):    128 (111)

Index    Estimated Time   Temperature Celsius
 112    2018-01-24 03:10    39  ********************
 ...    ..( 63 skipped).    ..  ********************
  48    2018-01-24 13:50    39  ********************
  49    2018-01-24 14:00    38  *******************
  50    2018-01-24 14:10    39  ********************
 ...    ..(  4 skipped).    ..  ********************
  55    2018-01-24 15:00    39  ********************
  56    2018-01-24 15:10    38  *******************
 ...    ..(  3 skipped).    ..  *******************
  60    2018-01-24 15:50    38  *******************
  61    2018-01-24 16:00    39  ********************
  62    2018-01-24 16:10    39  ********************
  63    2018-01-24 16:20    39  ********************
  64    2018-01-24 16:30    38  *******************
  65    2018-01-24 16:40    39  ********************
 ...    ..( 10 skipped).    ..  ********************
  76    2018-01-24 18:30    39  ********************
  77    2018-01-24 18:40    38  *******************
  78    2018-01-24 18:50    38  *******************
  79    2018-01-24 19:00    39  ********************
 ...    ..(  5 skipped).    ..  ********************
  85    2018-01-24 20:00    39  ********************
  86    2018-01-24 20:10    40  *********************
 ...    ..( 24 skipped).    ..  *********************
 111    2018-01-25 00:20    40  *********************

SCT Error Recovery Control:
           Read:    100 (10.0 seconds)
          Write:    100 (10.0 seconds)

Device Statistics (GP/SMART Log 0x04) not supported

Pending Defects log (GP Log 0x0c) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x000a  2          420  Device-to-host register FISes sent due to a COMRESET
0x0001  2            0  Command failed due to ICRC error
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS

[[email protected]:~] #
Wichtig ist hier nur die Rechnung "Raw_Read_Error_Rate minus Hardware_ECC_Recovered" im Auge zu behalten, das Ergebnis sollte möglichst unter 0.001% von "Hardware_ECC_Recovered" liegen. Erst wenn das Ergebnis höher ist, sollte man den Austausch durchführen (lassen).

Ergo: Ein einzelner Wert hat keinerlei Aussagekraft.
 
Top